Bioboost 1000 - Cetane Improver

Product Information

Bioboost 1000 - Cetane Improver

EFFECTIVE WITH BIODIESEL, WASTE / STRAIGHT VEGETABLE OIL, AND PETROLEUM DIESEL!

Bioboost 1000 will improve Biodiesel Performance + Power by increasing the Cetane rating of your fuel. Users will feel a definite increase in throttle and starting ability on mornings where previous untreated fuel felt sluggish. Bioboost 1000 is effective with Biodiesel, Vegetable Oil, and Diesel and users will feel the improved performance when Bioboost is added. Bioboost is a very effective additive for the biodiesel producer as they will now be able to offer a premium grade Biodiesel that is just as powerful as standard diesel at Biodiesel prices

The Main Benefits of Bioboost 1000 are:

Increased Power + Performance from produced biodiesel
Increased Cetane Rating
Increased Lubricity and therefore reduced engine wear
Reduced foaming when transferring
Improved Fuel stability
Corrosion inhinition of engine and tank
Aids in dispesing insoluble gums
Knocks water out of fuel rapidly

Dosage Levels - We suggest 750 ppm of Bioboost 1000 is added to your fuel for normal operations. If necessary, it can be used in stronger concentrations, as high as 1000 ppm where an initial clean up is required

Application - Bioboost 1000 should be added, prior to delivery of fuel to ensure good mixing is achieved in bulk tank quantities. Should you need to add the Bioboost 1000 to the vehicle, it is simple, just pour in the correct amount and allow agitation of the vehicle to do the mixing

Dilution Rates
ppm (Milligrams Per Litre)	Treatment per 1000 Litre Batch	Cetane Rating Improvement
550	500 ml	2-3
750 (Recommended)	750 ml	4-5
1000	1000 ml	6+

General Notes on Additives:

All of the additives we sell can be used together in the same batch of fuel (with a choice of EITHER coldflow 350 OR coldflow 402)
All of the additives we sell must be added to the Biodiesel/WVO individually, they cannot be mixed together and then added to the biodiesel
All of the additives we sell can be added to the Biodiesel/WVO at room temperature, but the Biodiesel/WVO itself must be at the recommended temperature as per the application instructions above
In their raw form the only additives that are classed as 'hazardous' are Bioboost 1000, and Allklear 400 which are flammable, however, when mixed with biodiesel / WVO the resulting mix is not flammable and as such is not hazardous. As these additives are used in such small concentrations with biodiesel they would also not register as harmful to the environment once mixed