Emulsion Breaker 210 - For Water Washing of Biodiesel

Product Information

Emulsion Breaker 210

Emulsion Breaker 210 is designed to aid removal of wash water from bio diesel production. Emulsion Breaker is to be used when water washing takes place. Emulsion Breaker 210 will speed up the splitting of the oil and water separation producing two distinct layers

Treatment Process:

Once the biodiesel reaction has been completed, remove the Glycerine layer prior to washing stage. To wash the Biodiesel, the Emulsion Breaker 210 should then be dosed to the warm water. We suggest the water is first heated to approximately 40°C. The correct level of Emulsion Breaker 210 is then added to the warm water. This should be then mixed well to ensure all of the emulsion breaker 210 has dispersed correctly. This aqueous mixture should then be added to the bio diesel to remove the contaminants contained in the oil. Emulsion Breaker 210 will rapidly bring about the oil/water splitting process

Dilution Rates

We recommend 2-4 Litres per 1000 litres of water are added, but this dependant upon the quality of the raw oil initially used. Once mixed well, turn off the mixing equipment then leave to stand to ensure the full separation occurs prior to running the water layer off the bottom of the tank

Download Emulsion Breaker 210 - MSDS PDF