Braun HZ3
Very low flow oil meters, with mechanical roller counter, and rugged metal exterior
Calibrated, EU Qualification Approval Number D01.5.223.03. Calibration Validity 10 Years
IMPORTANT - All meters must be fitted with a pre-filter of 100 Microns, Maximum. Ingress of particles over 100 microns may lead to wear and or jamming of the movement, and will not be covered by Warranty
Meters are supplied as standard with BSP Female threaded ports, pointing both outwards and downwards from the underside of the meter.
Suitable for Fuel Types;
- Heating Fuel, Extra Light / Light / Medium
- Kerosene
- Naphtha
- Diesel
- Petrol
- Lubricating Oils
Standard Specification (Non Pulsed)| | Braun HZ3 |
| Connection Threads | DIN 3852-X-G 1/4”, Internal (1/4" BSP Female) |
| Nominal Pressure | 6 Bar |
| Pressure Loss | 0.05 Bar to 0.1 Bar |
| Minimum Temperature | -5 Celcius |
| Maximum Temperature | +70 Celcius |
| Maximum Flow Rate | 30 lph (OUTSIDE OF CALIBRATED FLOW RANGE) |
| Calibrated Maximum Flow Rate | 12 lph |
| Calibrated Minimum Flow Rate | 0.18 lph |
| Approximate Starting Flowrate | 0.18 lph |
| To Suit Burner Power Rating | 1.65 kW to 265 kW |
| Maximum Permissible Error | ±1% of reading |
| Smallest Readable Amount | 0.01 Litres |
| Registration Capacity | 0.1 L to 9,9999.9 L |
| Safety Filter Mesh Size | TBC |
| Dirt Filter Mesh Size | TBC |
| Volume of Measuring Chamber | TBC |
| Ingress Protection | IP50 |
Dimensions & Weight| | Braun HZ3 |
| Height | TBC |
| Width | TBC |
| Depth | TBC |
| Weight Without Couplings | 1250 g |
Download Braun HZ3 Datasheet PDF
Download Braun HZ3 Instructions PDF
