Capillary Thermometer, With Polyamide Case for Panel Mounting
A low cost and compact, Capillary Thermometer with Rectangular Polyamide Case
These thermometers do not require any power, so are ideal for mounting in locations where power is not available, is not reliable, or is scarce. The Capillary is supplied permanently fitted to the gauge, and is run to an area where the temperature needs to be monitored, the Display can then be mounted remotely
The phial can be taped, tied, or glued to any surface, there is also a "Phial Pocket" available which can be screwed into a vessel so that the phial measures the temperature of the liquid around the Phial Pocket
Specification| Nominal Size | 58 mm X 25 mm |
| Cut Out Required | 58.5 mm X 25.5 mm |
| Range | Temp Option A = -40°C to +40°C
Temp Option B = 0°C to +120°C |
| Scales | °C Only (Black with White Graphics) for 0 to 120°C
°C Only (White with Blue & Red Graphics) for -40 to +40°C |
| Case & Bezel | ABS / Nylon |
| Dial | Stoved Enamel on Aluminium |
| Capillary Material | Copper;
PVC Sheathed for 0 to 120°C
White PP Sheather for -40 to +40°C |
| Capillary Length | 1500 mm |
| Bulb Material | Brass |
| Bulb Length | 25 mm |
| Bulb Diameter | 6.5 mm for 0 to 120°C
8.5 mm for -40 to +40°C |
| OPTIONAL Pocket Material | Brass or Copper |
| OPTIONAL Pocket Length | 50 mm or 100 mm (Including Hex) |
| OPTIONAL Pocket Diameter (Internal) | 10 mm |
| OPTIONAL Pocket Diameter (External) | 12.5 mm |
| Pocket Thread | BSPT (BSP Taper Male) |
| Window | Shatterproof Acrylic |
| Dial Legend | Stoved Enamel on Aluminium |
| Movement | Phosphor Bronze Spiral (Hydrocarbon Liquid Expansion) |
| Accuracy | EC Class 2 (UNI EN 13190:2003); ±3.0% Full Range |
| Ingress Protection | IP 40 as per EN 60529 |
Also available FOR 0-120°c GAUGES ONLY (Shown Below) is a Brass, or Stainless Steel 304/316 Thermowell / Pocket. These can be useful if the bulb on the thermometer needs to enter pipework - the pocket is 50mm or 100mm long beyond the 1/2"BSP male thread, and these can be fitted through the branch in a 3/4" tee piece, these can be selected in the options below
