Fitting Kit, Eco2Pure or Resin Tower to Polishing Pot

Product Information

Eco2Pure or Resin Tower to Polishing Pot Fittings Kit

To ease the connection of our 2kg 316 Stainless Steel Eco2Pure Tower, or Resin Towers to a Polishing Pot, we have this quick connect kit which will make life a lot easier;

2m of 3/4"ID PU Oil Hose to connect Reactor to Tower
3/4" Hose Tail Inlet to Tower complete with Jubilee Clip
Hydraulic Push-Fit Stud outlet from tower
Hydraulic Push-Fit Stud Inlet & Outlet to Polishing Pot
2m of 12mmOD Nylon Hydraulic Tubing to connect tower to pot and pot to storage vessel
Reel of PTFE

The Push Fit Studs are literally as the name suggests... push fit. They require no additional PTFE or sealant, as their threads are pre-treated with liquid PTFE, all you need is a spanner. The Nylon tubing then just pushes into the studs by hand and will resist pressure up to 10 bar.

Remember, the Polishing Pot can cope with flow rates up to 7.5 LPM, so you could connect two or even three 2kg Stainless Eco2Pure Vessels into one Polishng Pot, a simple Push Fit tee will facilitate this (available upon request)