Fill-Rite DC Pumps with Meter, ATEX Approved
Top quality, rainproof, self-priming gear pumps with Explosion-Proof motors and Atex (EU) approval for use with Petrol. Can also be used with Diesel, Kerosene, Mineral Spirits, Heptane, Hexane
Features a 2" drum thread for connection to 205 Litre Drums, and a 1"NPT Inlet thread for fitting to an Adjustable Suction Tube
DESPITE PICTURE SHOWING THEM, THIS PUMP HAS NO HOSE OR NOZZLE
TWO Year Warranty
Avaiable in 12vDC, and 24vDC
Approvals
- European;CE, ATEX/Ex Cat. II2GcT6, Sira Certificate Number; Sira04ATEX1242X
Wetted Components| Pump Body | Cast Iron |
| Impellor Case | Cast Iron |
| Impellor Case Seal | NBR |
| Motor Shaft Seal | NBR |
| Vanes | Bronze (5 No.) |
| Vane Springs | Not Present |
| Rotor / Gear / Impellor | Steel |
| Shaft Key / Nut | Stainless Steel |
| Motor Shaft | Stainless Steel |
| Bypass Valve Piston | |
| Bypass Valve Seal | NBR |
| Bypass Valve Spring | Stainless Steel |
Performance| Voltage / Frequency | 12vDC | 24vDC |
| kW | | |
| Amps | 20 | 10 |
| RPM | | |
| Duty Cycle | 30 Min | 30 Min |
| Cable Length | Not Present | Not Present |
| Bypass Valve Y/N | Y | Y |
| Max Flow | 57 lpm @ 0 m head | 57 lpm @ 0 m head |
| Discharge Pressure | 0.82 Bar / 12 PSI | 0.82 Bar / 12 PSI |
| Max Suction Lift (Dry) | 2.1 m Petrol, 2.4 m Diesel | 2.1 m Petrol, 2.4 m Diesel |
| Max Suction Lift (Wet) | | |
| Inlet Fitting | 1" NPT + 2" Drum Thread | 1" NPT + 2" Drum Thread |
| Outlet Fitting | 3/4" NPT | 3/4" NPT |
| Max Particle Tolerance | 100 Micron | 100 Micron |
| Max Liquid Temp | 40 Celcius | 40 Celcius |
| Min Liquid Temp | | |
| Max Room Temp | 40 Celcius | 40 Celcius |
| Min Room Temp | | |
| Thermal Protection Y/N | Y | Y |
| Max Liquid Viscosity | Diesel | Diesel |
| Ingress Protection | IP55 | IP55 |
Download Fill Rite FR1210 & FR2410 - Manual PDF
Download Fill Rite FR700 & FR701 - Atex Certificate PDF
Customers who bought this also bought…
