UK Freight only 8.75
Cimtek Hydrosorb, Bio-Tek, and Particulate Filters With Head
  • Click to enlarge

Cimtek Hydrosorb, Bio-Tek, and Particulate Filters With Head

Featuring a disposable filter canister, with a cast aluminium filter head, these filters are suitable for the dispensing of petroleum fuels, biodiesel and blends, and petroleum / ethanol blends up to 10%

For filtering 100% Bio Diesel we recommend use of Cimtek Bio-Tek filters

Produced by Cimtek Filtration USA, Branded 'GPI'

Thread sealant for your choice of inlet fittings can be found in our Sealants section, we recommend either PTFE HERE, or Heldite HERE

Part Number Comparison Chart
TypeFlow RateSupplyMicron RatingHead Port SizesNose ThreadMax PressureCimtek Part NumberGPI Part Number
Particle50 lpmPumped101" BSP1" UNF3.4 Bar / 50 PSICT70010-
Water & Particle (Hydrosorb II)68 lpmPumped101" BSP1" UNF3.4 Bar / 50 PSICT70062129300-02
Water & Particle (Hydrosorb II)68 lpmGravity301" BSP1,3/8" UNF3.4 Bar / 50 PSICT70066-
Water & Particle Bio-Tek (Hydroglass)68 lpmPumped21" BSP1" UNF3.4 Bar / 50 PSICT70232129340-04
Particle68 lpmPumped101" BSP1" UNF3.4 Bar / 50 PSICT70094129300-01
Water & Particle (Hydrosorb II)110 lpmPumped101" NPT1.5" UNF3.4 Bar / 50 PSICT70063129320-02
Water & Particle Bio-Tek (Hydroglass)150 lpmPumped21" NPT1.5" UNF3.4 Bar / 50 PSITo Be Confirmed, Use>129340-05

When replacing elements in filter housings with screw-on bowls we always recommend the use of Silicon O Ring Grease to aid tightening of the bowl, preventing pinching & scuffing and thus prolonging the life of the O Ring

Also available are replacement heads, these are listed as spares in the list below. The "Nose" size is the dimension of detail - see chart above to ensure correct head is ordered.

Download Cimtek Cross Reference Sheet PDFDownload Cimtek Cross Reference Sheet PDF

Product Options

£18.60


Product CodeFI003
ConditionNew

This field is required.
Top
This item has been added to your cart...