Subscribe to our mailing list below:
Goldenrod Filters, are superb quality Fuel Filters with inexpensive replacement elements, a transparent, amber tinted polycarbonate bowl to aid visual inspection of the filter whilst protecting the element and fuel from UV damage, and a reverse threaded water-drain plug to release any free water that settles to the bottom of the bowl
Available with either a 470-5 Particulate-Only filter, or 496-5 Water & Particulate Filter, more commonly known as a Water-Block Filter, the Water-Block filter is impregnated with a water-absorbing polymer which absorbs and traps permanently any water that comes into contact with it. To see what the polymer does please take a look at the image in THIS listing
Produced by the Dutton-Lainson Company USA, this factory produces both Goldenrod and Baldwin branded filters, which are of an identical pattern
Suitable for most fuels, including Diesel, Petrol, Kerosene, and Bio Fuels
Optional Filter Spanner to aid removal and refitting of the filter bowl
Bushes listed in options below are in Brass, Thread sealant can be found in our Sealants section, we recommend either PTFE HERE, or Heldite HERE
Compression fittings can be found HERE, Screwed fittings can be found HERE
For all filters with screw-on bowls we always recommend the use of Silicon O'Ring Grease to aid tightening of the bowl, preventing pinching & scuffing and thus prolonging the life of the O'Ring
Download Goldenrod Water Block Filter - Instructions PDF
1 Inch BSP, P-Only - (£37.00) 1 Inch BSP, W&P - (£40.00) Bushes 1/2 Inch (PAIR) - (£5.10) Bushes 1/4 Inch (PAIR) - (£5.10) Bushes 3/4 Inch (PAIR) - (£5.10) Bushes 3/8 Inch (PAIR) - (£5.10) Filter - Particle Only - (£10.00) Filter - Water & Particle - (£14.50) Filter Bowl Spanner - (£6.00) Super Lube O'Ring Grease - (£3.95)
Product Code: FI001
