Subscribe to our mailing list below:
Fuel oil meters with BSP threaded connection. Electronic counter with display of total volume, subtotal volume (can be reset) in m3, litres or US gallons. Flow rate per minute or hour and operation hours. Transmitter with 2 configurable signal outputs for volumetric pulses, flow rate (current or frequency) or limit switch
Not approved for resale use
Suitable for Fuel Types;
Your Benefits
Meters for heavy fuel oil should have a nominal diameter of DN 20 or larger
All threaded meters from 1/2"DN15, to 1.5"DN40 are supplied complete with BSP threaded Brass Adaptors, which enable the meter to be removed easily should it require inspection / testing. These fittings also enable the meter to be orientated in the desired plane. These fittings are not available for 2"DN50 Meters. Fittings shown below;
IMPORTANT - All meters must be fitted with a pre-filter of 100 Microns, Maximum. Ingress of particles over 100 microns may lead to wear and or jamming of the Rotary Piston, and will not be covered by Warranty. Oilybits can supply Inline Brass Y-Strainers with a cage supported 100 Micron Stainless Steel Mesh cloth, prices at foot of lising.
(All prices include VAT)
VZF 15 RC 130/16 - (£1273.50) VZF 20 RC 130/16 - (£1374.00) VZF 25 RC 130/16 - (£1537.50) VZF 40 RC 130/16 - (£2319.00) Y-Strainer 0.5 Inch 100Mic. - (£13.50) Y-Strainer 0.75 Inch 100Mic. - (£15.70) Y-Strainer 1 Inch 100Mic. - (£19.00) Y-Strainer 1.5 Inch 100Mic. - (£28.00) Y-Strainer 2 Inch 100Mic. - (£39.70)
Product Code: AQU9198