Piusi K33 ATEX Nutating Disc Flow Meters, ATEX Approved
For full product details refer to the below Piusi PDF downloads or Piusi.com
Suitable for:
- Diesel
- Kerosene
- Petrol
- Petrol + 15% Ethanol
- Avgas 100 / 100LL
- Jet A / A1
- Aspen 2/4
FLOW DIRECTIONS- There is essentially only 1 version of K33 ATEX, however, each of the 4 possible flow directions has a seperate part number. Due to only one model being stocked in the UK, the meters are supplied as standard with flow direction from left to right (looking at the meter from the front) - this means you will get 00057003A, if you wish to change the orientation to either of the other 3 possibilities, then this is simply done by removing the black cover, unscrewing and rotating the counter assembly and then replacing the black cover. All non stock variants are on a 6-8 week lead time.
Flow Directions| Part Number - Diesel/Biodiesel | Description | Flow Direction |
| 00057000A | K33 Version A | Right to Left |
| 00057001A | K33 Version B | Bottom to Top |
| 00057002A | K33 Version C | Top to Bottom |
| 00057003A | K33 Version D | Left to Right |
Features & Performance| Model Number | K33 ATEX |
| Suitable For | Diesel, Kerosene, Gasoline |
| Display | Mechanical, 3 Digit (2.1) |
| Power Source | None Required |
| Minimum Flow Rate | 20 lpm |
| Maximum Flow Rate | 120 lpm |
| Accuracy | ±1% (User Calibration) |
| Factory Calibration | Yes |
| User Calibration | Yes |
| Inlet / Outlet Fittings | 1" BSP Female |
| Maximum Operating Pressure | 3.5 bar / 50 PSI |
| Burst Pressure | TBC |
Download Piusi K33 ATEX - Catalogue Page PDF
