UK Freight only 8.75
Oilybits RPC-103 Raw Power Extreme Spinning Bowl Centrifuge
  • Click to enlarge

Oilybits RPC-103 'Raw Power Extreme' Spinning Bowl Centrifuge

PLEASE NOTE - This is a self-assembly kit in component form, the kits are of USA manufacture, and so threads and fixings are imperial, you will need a comprehensive tool kit and basic skills to assemble it, and wire it up safely. Oilybits now include a pack containing some items which will enable completion without having to purchase extra electrical components, the responsibility of safe assembly is that of the purchaser.

The Raw Power Centrifuge is an american designed & manufactured, high quaity, high precision, high speed, spinning-bowl centrifuge, for general centrifugal separation of liquids which are not agressive to the machines component materials.

Unlike Oilybits OB Series Centrifuge, the Raw Power Centrifuge does not use any of the incoming oil for essential lubrication, and therefore everything that passes through the centrifuge had been 'cleaned' to some extent, the slower the centrifuge is fed, the greater the extent of cleaning.

The Raw Power Centrifuge does not use filters, no waste media is created in using the machine, it also does not utilize a pump, and therefore the oil that goes in can be contaminated to a greater extent than oil which needs to pass through a pump. Particle size is limited to approximately 5mm Dia., this is the clearance between the rotor and the performance optimiser through which the dirty oil first flows, without the Performance Optimiser in place, the particle size increases to approximately 15mm Dia., the bore of the inlet hose tail.

The Raw Power Centrifuge is supplied as standard with a 'Performance Optimizer', this increases the efficiency of the centrifuge for ultimate cleaning performance while maintaining the easy and quick cleaning ability of the open bowl design. The optimizer bolts in to the rotor bowl with no modification and does not need to be removed when cleaning the bowl. The optimizer gets the oil spinning at full RPM prior to entering the bowl, rather than hitting the bowl static, this reduces turbulence / imbalance in the bowl. Also, the Performance Optimiser feeds the incoming/dirty oil directly to the outside wall at the bottom of the bowl, forcing the dirty oil to have to work its way from bottom to top, and outside to inside, then over the lip and out of the bowl, maximising its residence time, and therefore the efficiency of the cleaning operation.

The Raw Power Centrifuge has a dedicated drainage port for dirty oil and any liquid sludge, when the bowl stops spinning, the contents flood the base of the bowl and drain out through 3 small ports, into a sump beneath the bowl, and then out through a dedicated fitting below the bowl. Large particles over approximately 4mm will need manually scraping out of the bowl as they are too large to pass through the 3 small drainage ports.

These centrifuges are also popular for recovering precious metals in jewellery manufacture, offcuts, swarf, chips, and pastes from polishing can all be recovered or seprated from oils and coolants in a centrifuge, without any valuable metal being trapped in a filter element and lost.

Centrifuge Specification
Flow RateDependent on Media, Est. Diesel @ 20c, 19-95 LPH
Supply Voltage230v1Ph 50-60Hz. Automation-Direct GS1-20P5 Phase(speed) Controller included, powering a 3Ph230v60Hz motor
RPM6000
Centrifuge Bowl Inside Diameter190.5 mm
G-Force at Cleaner Wall3824 G
Centrifuge Bowl Dirt Holding Capaciy0.7 Litres
Overall Width40 cm
Overall Depth40 cm
Overall Height50 cm
Weight23 Kg
Inlet / Outlet / Sludge Connection3/4" NPT Female with 3/4" Hose Barbs Supplied
Suitable forWater, Diesel, WVO, Motor Oil, Biodiesel, ATF, Gear Oil Etc
Max Temp400 Farenheit
Heating Element Specifications
Voltage110v or 230 50/60Hz 1Ph
Power1000 W
Temperature Range15 to 120 C
Port Size3/4"NPT Female (Both In & Out)
Hose Barbs (supplied loose)For 3/4"ID Hose
Hose Material (supplied loose)Silicone
Housing MaterialCast Aluminium
Element MaterialStainless Steel
Imperial Tools Required for Assembly
ForTypeThread Size (For Ref. Only)
Motor to Centrifuge Mounting Bolts (4)7/32" Hex Key 
Motor Electrical Enclosure Cover (4)1/4" Hex Socket 
Motor Earth Bolt (1)5/16" Hex socket 
Leg Mounting Bolts (8)5/32" Hex Key 
Grease Retaining Grub Screws in Shaft Bushing (2)3/32" Hex Key10-24 UNC
Rubber Feet (3)1/2" Hex Socket 
Performance Optimiser (3)3/16" Hex Key 

Shown Below: Centrifuge with lid off (optimiser not fitted).

Shown Below: Performance Optimiser

Shown Below: Optional Heating Element with Temperature Control Knob 15-120c.

Shown Below: Phase(speed) Controller (Variable Frequency Device)

NOTE: The RPC-103 has been supplied with various VFD's in recent months due to supply shortages, they all perform the same as far as the RPC-103 is concerned, at the bottom of this page are instructions for all 3 types currently in use, we ship whatever comes in with the kits.

  • The RPC-103 is supplied as standard with a Phase(speed) Controller, which runs the 230v, 6000 RPM motor on the Raw Power Extreme Centrifuge.
  • Images 1 & 2: Automation Direct GS1-20P5
  • Images 3 & 4: ABB ACS55 & ABB Speed Potentiometer
  • Image 5: Automation Direct GS10 Dura Pulse GS11N-20P5
    

Shown Below: Included with the centrifuge and heater are packs of electrical fittings to complete assembly without the need to buy extra components.

  • See PDF Downloads below for the datasheets for each pack.

OPTIONAL ACCESSORIES AND PARTS:

Shown Below: Replacement Bowl Kit (Also purchased on its own by some people who want to try making their own centrifuge).

  • Single-piece aluminium bowl, machined from bar stock for perfect balance
  • Clamp Bushing for 5/8" OD motor shaft (no shaft key)

Shown Below: Low-flow Cast Iron, Miniature Gear Pump for Oils, for feeding the centrifuge at a controlled rate of 30 LPH.

  • Single speed, 30 LPH displacement
  • Continuous Duty
  • 230v50HZ1Ph
  • 1/8"BSP Female Ports
  • You will need to order appropriate tube and fititngs seperately to complete the assembly.
  • Click HERE to take you to the product page
Shipping Information
DescriptionPackaged Dimensions & WeightCode
Centrifuge Kit53 x 43 x 40 cm's, Wt. 25.4 Kg8421197000
Centrifuge Kit + Heater53 x 43 x 40 cm's, Wt. 26.8 Kg8421197000
Heating Element15 x 15 x 40 cm's, Wt. 2.5 Kg8516108000

Download RPC-103 Instruction Manual (Ft. ABB ACS55 VFD), PDFDownload RPC-103 Instruction Manual (Ft. ABB ACS55 VFD), PDF

Download RPC-103 Fittings Kit, PDFDownload RPC-103 Fittings Kit, PDF

Download RPC-103 Heater Fittings Kit, PDFDownload RPC-103 Heater Fittings Kit, PDF

Download ABB ACS55 Speed Controller Set Up Instructions, PDFDownload ABB ACS55 Speed Controller Set Up Instructions, PDF

Download Automation Direct GS1-20P5 Speed Controller Set Up Instructions, PDFDownload Automation Direct GS1-20P5 Speed Controller Set Up Instructions, PDF

Download Automation Direct GS10 GS11N-20P5 Dura Pulse Speed Controller Set Up Instructions, PDFDownload Automation Direct GS10 GS11N-20P5 Dura Pulse Speed Controller Set Up Instructions, PDF

Product Options

£1,930.00


Product CodeWVO_RPC_103
ConditionNew

This field is required.
Top
This item has been added to your cart...