Fill Rite, ATEX Approved DC Pumps

Product Information

Fill-Rite FR1210 & FR2410 Atex Approved DC Pumps

Top quality, rainproof, self-priming gear pumps with Explosion-Proof motors and Atex (EU) approval for use with Petrol. Can also be used with Diesel, Kerosene, Mineral Spirits, Heptane, Hexane

Features a 2" drum thread for connection to 205 Litre Drums, and a 1"NPT Inlet thread for fitting to an Adjustable Suction Tube

DESPITE PICTURE SHOWING THEM, THIS PUMP HAS NO HOSE OR NOZZLE

For your ease of reference, accessories required are listed below:

Goodyear Static Bonded Hose (3/4"BSP M-M Ends Required), for Petrol. HERE
Husky 1-GS UL Approved Nozzle, with Hanging Bracket, for All Fuels. HERE
Swivel for Nozzle Inlet, 3/4" BSP F-M Required. HERE
Reducing Bush for Nozzle Inlet, 1"BSP M-F Required. HERE
Adjustable Suction Tube. HERE

TWO Year Warranty

Approvals

European; CE, ATEX/Ex Cat. II2GcT6, Sira Certificate Number; Sira04ATEX1242X

Wetted Components
Pump Body	Cast Iron
Impellor Case	Cast Iron
Impellor Case Seal	NBR
Motor Shaft Seal	NBR
Vanes	Bronze
Vane Springs	Not Present
Rotor / Gear / Impellor	Steel
Shaft Key / Nut	Stainless Steel
Motor Shaft	Stainless Steel
Bypass Valve Piston
Bypass Valve Seal	NBR
Bypass Valve Spring	Stainless Steel

Performance
Voltage / Frequency	12vDC	24vDC
kW
Amps	20	10
RPM
Duty Cycle	30 Min	30 Min
Cable Length	Not Present	Not Present
Bypass Valve Y/N	Y	Y
Max Flow	57 lpm @ 0 m head	57 lpm @ 0 m head
Discharge Pressure	0.82 Bar / 12 PSI	0.82 Bar / 12 PSI
Max Suction Lift (Dry)	2.1 m Petrol, 2.4 m Diesel	2.1 m Petrol, 2.4 m Diesel
Max Suction Lift (Wet)
Inlet Fitting	1" NPT + 2" Drum Thread	1" NPT + 2" Drum Thread
Outlet Fitting	3/4" NPT	3/4" NPT
Max Particle Tolerance	100 Micron	100 Micron
Max Liquid Temp	40°	40°
Min Liquid Temp
Max Room Temp	40°	40°
Min Room Temp
Thermal Protection Y/N	Y	Y
Max Liquid Viscosity	Diesel	Diesel
Ingress Protection	IP55	IP55