FMT SwissAG 23-036 Vane Pump, 100 lpm

Product Information

FMT SwissAG 23-036, Vane Pump

A top quality, Swiss-made sliding-vane pump, designed for use with diesel and other products which are not agressive to the pumps component materials. Due to their unsurpassed reliability on continuous duty operations, these can also be used as process pumps

The optional "Viton 70" sealed version will provide a longer service life when used with Bio Diesel or Vegetable Oil products as Viton is more resistant to these products

Wetted Components
Pump Body	Aluminium AiSi12 (Sea Water Resistant)
Impellor Case	Aluminium AiSi12 (Sea Water Resistant)
Impellor Case Seal	NBR 70 (Viton 70 Optional)
Motor Shaft Seal	NBR 70 (Viton 70 Optional)
Vanes	PEI (200 Times harder than Acetyl)
Vane Springs	Not Present
Rotor / Gear / Impellor	Steel GG25
Shaft Key / Nut	Steel GG25
Motor Shaft	Steel GG25
Bypass Valve Piston	Acetyl
Bypass Valve Seal	NBR 70 (Viton 70 Optional)
Bypass Valve Spring	Stainless Steel

Performance
Voltage / Frequency	230v / 50Hz or 110v / 50Hz
kW	0.50
Amps	3.2
RPM	1400
Duty Cycle	Continuous
Cable Length	2 m
Bypass Valve Y/N	Y
Max Flow	100 lpm @ 0 m head
Discharge Pressure	2.5 Bar / 29 PSI
Max Suction Lift (Dry)	4.0 m
Max Suction Lift (Wet)
Inlet Fitting	1" BSP
Outlet Fitting	1" BSP
Max Particle Tolerance	100 Micron
Max Liquid Temp	55 Celcius
Min Liquid Temp
Max Room Temp	40 Celcius
Min Room Temp
Thermal Protection Y/N	Y
Max Liquid Viscosity	Diesel
Ingress Protection	IP54