Clarke TAM105 Cast Iron Peripheral Pump, 40 lpm

Product Information

Clarke TAM105 Cast Iron Peripheral Pump

A low cost peripheral pump, for use with any fluids that are not chemically agressive to its component materials, this includes Water, Diesel, and Bio Diesel (Oilybits providing a 12 month warranty for use with these liquids)

WE CAN DO EXCELLENT BULK PRICES ON THIS PUMP

Wetted Components
Pump Body	Cast Iron (Painted)
Impellor Case	Cast Iron (Painted)
Impellor Case Seal	NBR
Motor Shaft Seal	NBR
Vanes	Not Present
Vane Springs	Not Present
Rotor / Gear / Impellor	Brass
Shaft Key / Nut	Stainless Steel
Motor Shaft	Stainless Steel
Bypass Valve Piston	Not Present
Bypass Valve Seal	Not Present
Bypass Valve Spring	Not Present

Performance
Voltage / Frequency	230v / 50Hz
kW	0.33
Amps	1.4
RPM	2800
Duty Cycle	Continuous
Cable Length	Not Present
Bypass Valve Y/N	N
Max Flow	40 lpm @ 0 m head
Discharge Pressure	3.5 Bar / 50.75 PSI
Max Suction Lift (Dry)	None
Max Suction Lift (Wet)	7 m
Inlet Fitting	1" BSP
Outlet Fitting	1" BSP
Max Particle Tolerance	100 Micron
Max Liquid Temp	90 Celcius
Min Liquid Temp
Max Room Temp	40 Celcius
Min Room Temp
Thermal Protection Y/N	Y
Max Liquid Viscosity	Water
Ingress Protection	IP44