UK Freight only 8.75
Aqua 9,7/8" Polypropylene / Polycarbonate Filter
  • Click to enlarge

Aqua 9,7/8" Polypropylene / Polycarbonate Filter

A quality Particulate filter, suitable for a wide range of liquids, subject to chemical compatibility with its component parts.

This filter should only be fitted with BSP Parallel male fittings, not BSP taper, suitable Hose Tails in BSP Parallel male can be found HERE

SEAL MATERIAL - This filter is supplied as standard with a NITRILE (Also known as BUNA-N or NBR) Top seal, this is the same material supplied with all other manufacturers filters of this type as they are designed for Water. If you intend to use the filter with Vegetable Oil or Bio Diesel, the Nitrile seal will swell and then become useless, it is therefore essential that a spare seal in VITON is purchased to replace the original seal. Viton seals are available in the product options below

PRESSURE FILTER - This is a pressure filter, it is designed to be fitted downstream of a pump of in a pressurised line, if it is fitted in a vacuum situation the red pressure-release button on the top will be drawn downward by the suction and will draw air into the system

ELEMENT NOT INCLUDED - This Filter Housing accepts 9,7/8" Filter Elements, these are available HERE

Optional Fitting Bracket Pictured Below;

Dispensing MeansGravity or Pumped
Standard Filter9,7/8" Particulate Only
Inlet / Outlet Fittings1" BSP Female
Bowl MaterialPolycarbonate, Clear
Size12" Deep, 5" Diameter
Max FlowUnknown
Max PressureUnknown

When replacing elements in filter housings with screw-on bowls we always recommend the use of Silicon O Ring Grease to aid tightening of the bowl, preventing pinching & scuffing and thus prolonging the life of the O Ring

Download Aqua FP2 Housings PDFDownload Aqua FP2 Housings PDF

Product Options


Product Code97CL8WT56

This field is required.
This item has been added to your cart...