UK Freight only 8.75
Aqua Metro DOMINO ARD, Rotary Piston, Chemical Flow Meters
  • Click to enlarge

Aqua Metro DOMINO ARD, Rotary Piston, Chemical Flow Meters

Chemical meters with mechanical roller counter in Litres, and with BSP Threaded Fittings as standard.

Measuring Unit and Modules to be ordered seperately.

Not approved for resale use

Your Benefits

  • High operational safety due to vibration resistance
  • Space saving installation without requirement of straight inlet and outlet paths
  • Easy to install without restriction either horizontally or vertically
  • High operational safety due to integral safety filter in the meter inlet. Reduces effort on start-up
  • For chemical liquids with viscosities up to about 10,000 mPa-s
  • Threaded Connections (BRASS Housing)
  • Flanged Connections DIN 2501 / SN 21843 (CAST IRON, BRASS, PTFE Housings)
  • Combinable with all DOMINO modules
  • Special versions in U.S. Gallons or with different flange specifications, such as JIS, available on request
  • Chemical-resistant Yellow RAL1007 enamel finish

All threaded meters from 1/2"DN15, to 1.5"DN40 are supplied complete with BSP threaded Brass Adaptors, which enable the meter to be removed easily should it require inspection / testing. These fittings also enable the meter to be orientated in the desired plane. These fittings are not available for 2"DN50 Meters. Fittings shown below;

IMPORTANT - All meters must be fitted with a pre-filter (see DIRT MESH FILTER SIZE, in chart below). Ingress of particles over the dirt mesh filter size may lead to wear and or jamming of the Rotary Piston, and will not be covered by Warranty.

Selection of commonly measured liquids:

  • Acetic Acid
  • Acetone
  • Animal Fats
  • Ammonia Hydroxide, Ammonia Solution
  • Bromium Hydroxide, Bromic Acid
  • Butyl Acetate, Acetic Butyl Ester
  • Chloroform, Trichloromethane
  • Citric Acid
  • Diethylene Glycol
  • Distilled Water
  • Ethyl Acetate, Acetic Ether, Acetic Ester
  • Ethyl Alcohol, Alcohol, Ethanol
  • Ethyl Ethylene, Ethylene, Diethyl Ethylene
  • Ethylene Glycol
  • Formaldehyde Solution
  • Formic Acid
  • Glycerine
  • Hexine
  • Hydrochloric Acid
  • Hydrofluoric Acid
  • Hydrogen Peroxide, Hydrogen Superoxide
  • Isopropyl Ether, Di-isopropyl Ether
  • Isopropyl Alcohol, Propyl Alcohol
  • Kerosene, Petroleum (More commonly used with Aqua Metro VZO & VZF Range)
  • Liquid Ammonia
  • Liquid Bromium
  • Liquid Butane
  • Magnesium Sulphate
  • Methanol, Methyl Alcohol
  • Methylene Chloride, Dichloromethylene
  • Methyl Ethyl Ketone
  • Molasses (Without Urea)
  • Nitric Acid
  • Paraffin
  • Perchloroethylene, Tetrachloroethylene
  • Phosphoric Acid
  • Potassium Hydroxide, Caustic Potash
  • Propionic Acid
  • Prussic Acid
  • Pure Benzol
  • Sodium Chloride Solution, Brine
  • Sodium Hydroxide, Caustic Soda Solution
  • Sodium Hyperchlorite Solution, Javelle Water
  • Sulphocarbonic Acid
  • Sulphuric Acid, Sulfuric Acid
  • Tar, Pitch
  • Tetrachloromethane, Carbon Tetrachloride
  • Toluene
  • Trichloroethylene (dry)
  • Vegetable Oils
Specification
  ARD 15 ARD 20 ARD 25 ARD 40 ARD 50
Nominal Diameter 15 mm / 1/2" 20 mm / 3/4" 25 mm / 1" 40 mm / 1.5" 50 mm / 2"
Installation Length 165 mm 165 mm 190 mm (260 mm in PTFE) 300 mm 350 mm
Connection Threads 1/2" BSP 3/4" BSP 1" BSP 1.5" BSP 2" BSP
Rated Max. Pressure - ARD 1000 - Threaded 16 Bar 16 Bar 16 Bar 16 Bar 16 Bar
Rated Max. Pressure - ARD 1000 - Flanged 25 Bar 25 Bar 25 Bar 25 Bar 25 Bar
Rated Max. Pressure - ARD 2000 - Flanged 40 Bar 40 Bar 40 Bar 40 Bar 40 Bar
Rated Max. Pressure - ARD 3000 - Flanged 25 Bar 25 Bar 25 Bar 25 Bar 25 Bar
Rated Max. Pressure - ARD 4000 - Flanged 10 Bar 10 Bar 10 Bar 10 Bar 10 Bar
Maximum Temperature 40°c, 50°c, 90°c, 130°c or 180°c, Subject to version 40°c, 50°c, 90°c, 130°c or 180°c, Subject to version 40°c, 50°c, 90°c, 130°c or 180°c, Subject to version 40°c, 50°c, 90°c, 130°c or 180°c, Subject to version 40°c, 50°c, 90°c, 130°c or 180°c, Subject to version
Maximum Flow Rate 400 lph 1,500 lph 3,000 lph 9,000 lph 30,000 lph
Flow in Batching Mode 320 lph 1,200 lph 2,400 lph 7,200 lph 24,000 lph
Continuous Flow Rate 200 lph 750 lph 1,500 lph 4,500 lph 15,000 lph
Minimum Flow Rate 30 lph 60 lph 150 lph 450 lph 1,500 lph
Approx Starting Flowrate 6 lph 12 lph 30 lph 90 lph 300 lph
Measuring Error ±0.5% of effective value ±0.5% of effective value ±0.5% of effective value ±0.5% of effective value ±0.5% of effective value
Measuring Error Repeatability ±0.1% of reading ±0.1% of reading ±0.1% of reading ±0.1% of reading ±0.1% of reading
Smallest Readable Amount 0.01 Litres 0.1 Litres 0.1 Litres 0.1 Litres 1 Litre
Registration Capacity 1,000 Litres 10,000 Litres 10,000 Litres 10,000 Litres 100,000 Litres
Safety Filter Mesh Size 400 Micron 400 Micron 400 Micron 800 Micron 800 Micron
Dirt Filter Mesh Size 1000 Micron 100 Micron 250 Micron 250 Micron 250 Micron
Volume of Measuring Chamber 12 cm3 36 cm3 100 cm3 330 cm3 1,200 cm3
Ingress Protection IP65 IP65 IP65 IP65  
Measuring range as a function of material combination
Type Measuring Chamber Rotary Piston - Aluminium Rotary Piston - Graphite Rotary Piston - Stainless Steel Rotary Piston - PTFE
ARD 1000 Brass 5 % 5 %   10 %
ARD 2000 Stainless Steel 5 % 5 % 10 % 10 %
ARD 3000 Stainless Steel 5 % 5 % 10 % 10 %
ARD 4000 PTFE       10 %
Aqua Metro Model Numbers - MEASURING UNIT
TYPE Fitting Type Fitting Size PN - Bar Model Housing Measuring Chamber Seal Set Rotary Piston Art. No.
ARD 1000 Threaded 1/2" 16 ARD 15/1111-A2 Brass Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83000
ARD 1000 Threaded 1/2" 16 ARD 15/1111-G2 Brass Brass / PPS 2 - FPM G - Graphite (Max 130c) 83002
ARD 1000 Threaded 1/2" 16 ARD 15/1111-P2 Brass Brass / PPS 2 - FPM P - PTFE (Max 40c) 83004
ARD 1000 Threaded 3/4" 16 ARD 20/1111-A2 Brass Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83033
ARD 1000 Threaded 3/4" 16 ARD 20/1111-G2 Brass Brass / PPS 2 - FPM G - Graphite (Max 130c) 83035
ARD 1000 Threaded 3/4" 16 ARD 20/1111-P2 Brass Brass / PPS 2 - FPM P - PTFE (Max 40c) 83036
ARD 1000 Threaded 1" 16 ARD 25/1111-A2 Brass Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83058
ARD 1000 Threaded 1" 16 ARD 25/1111-G2 Brass Brass / PPS 2 - FPM G - Graphite (Max 130c) 83060
ARD 1000 Threaded 1" 16 ARD 25/1111-P2 Brass Brass / PPS 2 - FPM P - PTFE (Max 40c) 83062
ARD 1000 Threaded 1.5" 16 ARD 40/1211-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83106
ARD 1000 Threaded 1.5" 16 ARD 40/1211-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83108
ARD 1000 Threaded 1.5" 16 ARD 40/1211-P2 Spherolic Cast Iron Brass / PPS 2 - FPM P - PTFE (Max 40c) 83110
ARD 1000 Flanged 1/2" 25 ARD 15/1221-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83005
ARD 1000 Flanged 1/2" 25 ARD 15/1221-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83007
ARD 1000 Flanged 3/4" 25 ARD 20/1221-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83037
ARD 1000 Flanged 3/4" 25 ARD 20/1221-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83039
ARD 1000 Flanged 1" 25 ARD 25/1221-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83063
ARD 1000 Flanged 1" 25 ARD 25/1221-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83065
ARD 1000 Flanged 1.5" 25 ARD 40/1221-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83111
ARD 1000 Flanged 1.5" 25 ARD 40/1221-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83113
ARD 1000 Flanged 2" 25 ARD 50/1221-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83154
ARD 1000 Flanged 2" 25 ARD 50/1221-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83155
ARD 1000 Flanged 1/2" 25 ARD 15/1222-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83009
ARD 1000 Flanged 1/2" 25 ARD 15/1222-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83010
ARD 1000 Flanged 1/2" 25 ARD 15/1222-P2 Spherolic Cast Iron Brass / PTFE 2 - FPM P - PTFE (Max 40c) 83011
ARD 1000 Flanged 3/4" 25 ARD 20/1222-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83040
ARD 1000 Flanged 3/4" 25 ARD 20/1222-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83041
ARD 1000 Flanged 3/4" 25 ARD 20/1222-P2 Spherolic Cast Iron Brass / PTFE 2 - FPM P - PTFE (Max 40c) 83042
ARD 1000 Flanged 1" 25 ARD 25/1222-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83067
ARD 1000 Flanged 1" 25 ARD 25/1222-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83068
ARD 1000 Flanged 1" 25 ARD 25/1222-P2 Spherolic Cast Iron Brass / PTFE 2 - FPM P - PTFE (Max 40c) 83069
ARD 1000 Flanged 1.5" 25 ARD 40/1222-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83115
ARD 1000 Flanged 1.5" 25 ARD 40/1222-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83116
ARD 1000 Flanged 1.5" 25 ARD 40/1222-P2 Spherolic Cast Iron Brass / PTFE 2 - FPM P - PTFE (Max 40c) 83117
ARD 1000 Flanged 2" 25 ARD 50/1222-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83157
ARD 1000 Flanged 2" 25 ARD 50/1222-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83158
ARD 1000 Flanged 2" 25 ARD 50/1222-P2 Spherolic Cast Iron Brass / PTFE 2 - FPM P - PTFE (Max 40c) 83159
ARD 1000 (Heavy Fuel Oil, Accuracy +-1%) Flanged 1/2" 25 ARD 15/1223-A2 Spherolic Cast Iron Brass / PTFE 2 - FPM A - Aluminium (Max 180c) 83012
ARD 1000 (Heavy Fuel Oil, Accuracy +-1%) Flanged 3/4" 25 ARD 20/1223-A2 Spherolic Cast Iron Brass / PTFE 2 - FPM A - Aluminium (Max 180c) 83043
ARD 1000 (Heavy Fuel Oil, Accuracy +-1%) Flanged 1" 25 ARD 25/1223-A2 Spherolic Cast Iron Brass / PTFE 2 - FPM A - Aluminium (Max 180c) 83070
ARD 1000 (Heavy Fuel Oil, Accuracy +-1%) Flanged 1.5" 25 ARD 40/1223-A2 Spherolic Cast Iron Brass / PTFE 2 - FPM A - Aluminium (Max 180c) 83118
ARD 1000 (Heavy Fuel Oil, Accuracy +-1%) Flanged 2" 25 ARD 50/1223-A2 Spherolic Cast Iron Brass / PTFE 2 - FPM A - Aluminium (Max 180c) 83160
ARD 1000 Flanged 1" 25 ARD 25/1222-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83067
ARD 1000 Flanged 1" 25 ARD 25/1222-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83068
ARD 1000 Flanged 1" 25 ARD 25/1222-P2 Spherolic Cast Iron Brass / PTFE 2 - FPM P - PTFE (Max 40c) 83069
ARD 1000 Flanged 1" 25 ARD 25/1222-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83067
ARD 1000 Flanged 1" 25 ARD 25/1222-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83068
ARD 1000 Flanged 1" 25 ARD 25/1222-P2 Spherolic Cast Iron Brass / PTFE 2 - FPM P - PTFE (Max 40c) 83069
ARD 1000 Flanged 1/2" 16 ARD 15/1111-A2 Spherolic Cast Iron Brass / PPS 2 - FPM A - Aluminium (Max 130c) 83000
ARD 1000 Flanged 1/2" 16 ARD 15/1111-G2 Spherolic Cast Iron Brass / PPS 2 - FPM G - Graphite (Max 130c) 83002
ARD 1000 Flanged 1/2" 16 ARD 15/1111-P2 Spherolic Cast Iron Brass / PPS 2 - FPM P - PTFE (Max 40c) 83004
ARD 1000 Flanged 1/2" 40 ARD 15/2224-A2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM A - Aluminium (Max 130c) 83013
ARD 1000 Flanged 1/2" 40 ARD 15/2224-G2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM G - Graphite (Max 130c) 83014
ARD 1000 Flanged 1/2" 40 ARD 15/2224-S2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM S - Stainless Steel (Max 130c) 83015
ARD 1000 Flanged 1/2" 40 ARD 15/2224-P2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM P - PTFE (Max 40c) 83017
ARD 1000 Flanged 3/4" 40 ARD 20/2224-A2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM A - Aluminium (Max 130c) 83218
ARD 1000 Flanged 3/4" 40 ARD 20/2224-G2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM G - Graphite (Max 130c) 83219
ARD 1000 Flanged 3/4" 40 ARD 20/2224-S2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM S - Stainless Steel (Max 130c) 83220
ARD 1000 Flanged 3/4" 40 ARD 20/2224-P2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM P - PTFE (Max 40c) 83221
ARD 1000 Flanged 1" 40 ARD 25/2224-A2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM A - Aluminium (Max 130c) 83071
ARD 1000 Flanged 1" 40 ARD 25/2224-G2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM G - Graphite (Max 130c) 83072
ARD 1000 Flanged 1" 40 ARD 25/2224-S2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM S - Stainless Steel (Max 130c) 83073
ARD 1000 Flanged 1" 40 ARD 25/2224-P2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM P - PTFE (Max 40c) 83075
ARD 1000 Flanged 1.5" 40 ARD 40/2224-A2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM A - Aluminium (Max 130c) 83119
ARD 1000 Flanged 1.5" 40 ARD 40/2224-G2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM G - Graphite (Max 130c) 83120
ARD 1000 Flanged 1.5" 40 ARD 40/2224-S2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM S - Stainless Steel (Max 130c) 83121
ARD 1000 Flanged 1.5" 40 ARD 40/2224-P2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM P - PTFE (Max 40c) 83123
ARD 1000 Flanged 2" 40 ARD 50/2224-A2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM A - Aluminium (Max 130c) 83161
ARD 1000 Flanged 2" 40 ARD 50/2224-G2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM G - Graphite (Max 130c) 83162
ARD 1000 Flanged 2" 40 ARD 50/2224-P2 Spherolic Cast Iron Stainless Steel / PPS 2 - FPM P - PTFE (Max 40c) 83165
ARD 2000 Flanged 1/2" 40 ARD 15/2225-A2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM A - Aluminium (Max 180c) 83018
ARD 2000 Flanged 1/2" 40 ARD 15/2225-G2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM G - Graphite (Max 180c) 83019
ARD 2000 Flanged 1/2" 40 ARD 15/2225-S2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM S - Stainless Steel (Max 180c) 83020
ARD 2000 Flanged 1/2" 40 ARD 15/2225-P2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM P - PTFE (Max 40c) 83021
ARD 2000 Flanged 3/4" 40 ARD 20/2225-A2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM A - Aluminium (Max 180c) 83044
ARD 2000 Flanged 3/4" 40 ARD 20/2225-G2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM G - Graphite (Max 180c) 83045
ARD 2000 Flanged 3/4" 40 ARD 20/2225-S2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM S - Stainless Steel (Max 180c) 83046
ARD 2000 Flanged 3/4" 40 ARD 20/2225-P2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM P - PTFE (Max 40c) 83047
ARD 2000 Flanged 1" 40 ARD 25/2225-A2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM A - Aluminium (Max 180c) 83076
ARD 2000 Flanged 1" 40 ARD 25/2225-G2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM G - Graphite (Max 180c) 83077
ARD 2000 Flanged 1" 40 ARD 25/2225-S2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM S - Stainless Steel (Max 180c) 83078
ARD 2000 Flanged 1" 40 ARD 25/2225-P2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM P - PTFE (Max 40c) 83079
ARD 2000 Flanged 1.5" 40 ARD 40/2225-A2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM A - Aluminium (Max 180c) 83124
ARD 2000 Flanged 1.5" 40 ARD 40/2225-G2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM G - Graphite (Max 180c) 83125
ARD 2000 Flanged 1.5" 40 ARD 40/2225-S2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM S - Stainless Steel (Max 180c) 83126
ARD 2000 Flanged 1.5" 40 ARD 40/2225-P2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM P - PTFE (Max 40c) 83127
ARD 2000 Flanged 2" 40 ARD 50/2225-A2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM A - Aluminium (Max 180c) 83166
ARD 2000 Flanged 2" 40 ARD 50/2225-G2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM G - Graphite (Max 180c) 83167
ARD 2000 Flanged 2" 40 ARD 50/2225-P2 Spherolic Cast Iron Stainless Steel / PTFE 2 - FPM P - PTFE (Max 40c) 83169
ARD 2000 Flanged 1/2" 40 ARD 15/2225-G6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE G - Graphite (Max 180c) 83022
ARD 2000 Flanged 1/2" 40 ARD 15/2225-S6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE S - Stainless Steel (Max 180c) 83023
ARD 2000 Flanged 1/2" 40 ARD 15/2225-P6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE P - PTFE (Max 40c) 83024
ARD 2000 Flanged 3/4" 40 ARD 20/2225-G6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE G - Graphite (Max 180c) 83048
ARD 2000 Flanged 3/4" 40 ARD 20/2225-S6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE S - Stainless Steel (Max 180c) 83049
ARD 2000 Flanged 3/4" 40 ARD 20/2225-P6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE P - PTFE (Max 40c) 83050
ARD 2000 Flanged 1" 40 ARD 25/2225-G6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE G - Graphite (Max 180c) 83080
ARD 2000 Flanged 1" 40 ARD 25/2225-S6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE S - Stainless Steel (Max 180c) 83081
ARD 2000 Flanged 1" 40 ARD 25/2225-P6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE P - PTFE (Max 40c) 83082
ARD 2000 Flanged 1.5" 40 ARD 40/2225-G6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE G - Graphite (Max 180c) 83128
ARD 2000 Flanged 1.5" 40 ARD 40/2225-S6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE S - Stainless Steel (Max 180c) 83129
ARD 2000 Flanged 1.5" 40 ARD 40/2225-P6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE P - PTFE (Max 40c) 83130
ARD 2000 Flanged 2" 40 ARD 50/2225-G6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE G - Graphite (Max 180c) 83170
ARD 2000 Flanged 2" 40 ARD 50/2225-P6 Spherolic Cast Iron Stainless Steel / PTFE 6 - PTFE P - PTFE (Max 40c) 83172
ARD 3000 Flanged 1/2" 25 ARD 15/3315-G2 Stainless Steel Stainless Steel / PTFE 2 - FPM G - Graphite (Max 180c) 83026
ARD 3000 Flanged 1/2" 25 ARD 15/3315-S2 Stainless Steel Stainless Steel / PTFE 2 - FPM S - Stainless Steel (Max 180c) 83027
ARD 3000 Flanged 1/2" 25 ARD 15/3315-P2 Stainless Steel Stainless Steel / PTFE 2 - FPM P - PTFE (Max 40c) 83028
ARD 3000 Flanged 3/4" 25 ARD 20/3315-G2 Stainless Steel Stainless Steel / PTFE 2 - FPM G - Graphite (Max 180c) 83052
ARD 3000 Flanged 3/4" 25 ARD 20/3315-S2 Stainless Steel Stainless Steel / PTFE 2 - FPM S - Stainless Steel (Max 180c) 83053
ARD 3000 Flanged 3/4" 25 ARD 20/3315-P2 Stainless Steel Stainless Steel / PTFE 2 - FPM P - PTFE (Max 40c) 83054
ARD 3000 Flanged 1" 25 ARD 25/3315-G2 Stainless Steel Stainless Steel / PTFE 2 - FPM G - Graphite (Max 180c) 83096
ARD 3000 Flanged 1" 25 ARD 25/3315-S2 Stainless Steel Stainless Steel / PTFE 2 - FPM S - Stainless Steel (Max 180c) 83097
ARD 3000 Flanged 1" 25 ARD 25/3315-P2 Stainless Steel Stainless Steel / PTFE 2 - FPM P - PTFE (Max 40c) 83098
ARD 3000 Flanged 1.5" 25 ARD 40/3315-G2 Stainless Steel Stainless Steel / PTFE 2 - FPM G - Graphite (Max 180c) 83144
ARD 3000 Flanged 1.5" 25 ARD 40/3315-S2 Stainless Steel Stainless Steel / PTFE 2 - FPM S - Stainless Steel (Max 180c) 83145
ARD 3000 Flanged 1.5" 25 ARD 40/3315-P2 Stainless Steel Stainless Steel / PTFE 2 - FPM P - PTFE (Max 40c) 83146
ARD 3000 Flanged 2" 25 ARD 50/3315-G2 Stainless Steel Stainless Steel / PTFE 2 - FPM G - Graphite (Max 180c) 83173
ARD 3000 Flanged 2" 25 ARD 50/3315-P2 Stainless Steel Stainless Steel / PTFE 2 - FPM P - PTFE (Max 40c) 83175
ARD 3000 Flanged 1/2" 25 ARD 15/3315-G6 Stainless Steel Stainless Steel / PTFE 6 - PTFE G - Graphite (Max 180c) 83029
ARD 3000 Flanged 1/2" 25 ARD 15/3315-S6 Stainless Steel Stainless Steel / PTFE 6 - PTFE S - Stainless Steel (Max 180c) 83030
ARD 3000 Flanged 1/2" 25 ARD 15/3315-P6 Stainless Steel Stainless Steel / PTFE 6 - PTFE P - PTFE (Max 40c) 83031
ARD 3000 Flanged 3/4" 25 ARD 20/3315-G6 Stainless Steel Stainless Steel / PTFE 6 - PTFE G - Graphite (Max 180c) 83055
ARD 3000 Flanged 3/4" 25 ARD 20/3315-S6 Stainless Steel Stainless Steel / PTFE 6 - PTFE S - Stainless Steel (Max 180c) 83056
ARD 3000 Flanged 3/4" 25 ARD 20/3315-P6 Stainless Steel Stainless Steel / PTFE 6 - PTFE P - PTFE (Max 40c) 83057
ARD 3000 Flanged 1" 25 ARD 25/3315-G6 Stainless Steel Stainless Steel / PTFE 6 - PTFE G - Graphite (Max 180c) 83099
ARD 3000 Flanged 1" 25 ARD 25/3315-S6 Stainless Steel Stainless Steel / PTFE 6 - PTFE S - Stainless Steel (Max 180c) 83100
ARD 3000 Flanged 1" 25 ARD 25/3315-P6 Stainless Steel Stainless Steel / PTFE 6 - PTFE P - PTFE (Max 40c) 83101
ARD 3000 Flanged 1.5" 25 ARD 40/3315-G6 Stainless Steel Stainless Steel / PTFE 6 - PTFE G - Graphite (Max 180c) 83147
ARD 3000 Flanged 1.5" 25 ARD 40/3315-S6 Stainless Steel Stainless Steel / PTFE 6 - PTFE S - Stainless Steel (Max 180c) 83148
ARD 3000 Flanged 1.5" 25 ARD 40/3315-P6 Stainless Steel Stainless Steel / PTFE 6 - PTFE P - PTFE (Max 40c) 83149
ARD 3000 Flanged 2" 25 ARD 50/3315-G6 Stainless Steel Stainless Steel / PTFE 6 - PTFE G - Graphite (Max 180c) 83176
ARD 3000 Flanged 2" 25 ARD 50/3315-P6 Stainless Steel Stainless Steel / PTFE 6 - PTFE P - PTFE (Max 40c) 83178
ARD 4000 Flanged 1" 10 ARD 25/4467-P5 PTFE PTFE / Tantal 5 - FFKM P - PTFE (Max 50c) 83105
ARD 4000 Flanged 1.5" 10 ARD 40/4467-P5 PTFE PTFE / Tantal 5 - FFKM P - PTFE (Max 50c) 83153
VZTH 8 Threaded 3/8" 25 VZTH 8 G Brass Brass FPM Graphite 92537
VZTH 8 Threaded 3/8" 25 VZTH 8 G-RE0-00314 Brass Brass FPM Graphite 89727
Aqua Metro Model Numbers - MODULES
Description Max Temperature Model DN 15 DN 20 DN 25 DN 40 DN 50
Roller Register 180c RW/RD 83500 83526 83552 83578 83604
Roller Register with Reed Pulser RV 0.1 L 180c RV0.1/RD 83501 83695 - - -
Roller Register with With Reed Pulser RV 1 L 180c RV1/RD 83502 83527 83553 83579 -
Roller Register with With Reed Pulser RV 10 L 180c RV10/RD - 83528 83554 83580 83605
Roller Register with With Inductive Pulser Switch (NAMUR) IN 0.01 L 130c IN0.01/RW/RD 83509 83535 - - -
Roller Register with With Inductive Pulser Switch (NAMUR) IN 0.1 L 130c IN0.1/RW/RD 83512 83538 83561 83587 -
Roller Register with With Inductive Pulser Switch (NAMUR) IN 1 L 130c IN1/RW/RD - - 83564 83590 83613
Roller Register with With Inductive Pulser Switch (NAMUR) IN 0.01 L (High Temp) 180c IN0.01H/RW/RD 83513 83539 - - -
Roller Register with With Inductive Pulser Switch (NAMUR) IN 0.1 L (High Temp) 180c IN0.1H/RW/RD 83516 83542 83565 83591 -
Roller Register with With Inductive Pulser Switch (NAMUR) IN 1 L (High Temp) 180c IN1H/RW/RD - - 83568 83594 83617
Roller Register with With Inductive Pulser Switch (NAMUR) INA (High Temp) 90c INA/RW/RD 83517 83543 83569 83595 83621
Inductive Pulser Switch (NAMUR) INA 90c INA/RD 83520 83546 83572 83598 83624
Roller Register with With Inductive Pulser Switch (NAMUR) INAH (High Temp) 180c INAH/RW/RD 83521 83547 83573 83599 83625
Inductive Pulser Switch (NAMUR) INAH 180c INAH/RD 83524 83550 83576 83602 83628
Intermediate Drive for AS or ASP Batching Control   GTAS/RD 83685 83686 83687 83688 83689
Pulse Values
Pulser Type Model DN 15 l/pulse DN 20 l/pulse DN 25 l/pulse DN 40 l/pulse DN 50 l/pulse
Reed Pulser RV 0.1 / 1 / 10 L RV 0.1 1 1 1 10
Reed Pulser RV 1 / 10 / 100 L RV 1 10 10 10 100
Inductive Pulser Switch (NAMUR) IN 0.1 L / 1 L / 10 L IN 0.01 0.01 0.1 0.1 1
Inductive Pulser Switch (NAMUR) IN 0.1 L / 1 L / 10 L IN 0.1 0.1 1 1 10
Inductive Pulser Switch (NAMUR) INA INA 0.0006 0.00185 0.005 0.017 0.06
Pulse Frequencies
Pulser Type Model   DN 15 Hz DN 20 Hz DN 25 Hz DN 40 Hz DN 50 Hz
Inductive Pulser Switch (NAMUR) IN IN QMax 11.111 41.667 8.333 25.000 8.333
Inductive Pulser Switch (NAMUR) IN IN QMin 0.278 0.833 0.208 0.625 0.208
Inductive Pulser Switch (NAMUR) INA INA Qmax 185.185 225.225 166.667 147.059 138.889
Inductive Pulser Switch (NAMUR) INA INA Qmin 4.630 4.505 4.176 3.676 3.472

Download Aqua Metro DOMINO Chemical Flow Meters - Brochure PDFDownload Aqua Metro DOMINO Chemical Flow Meters - Brochure PDF

Download Aqua Metro DOMINO Chemical Flow Meters - Part Number Chart PDFDownload Aqua Metro DOMINO Chemical Flow Meters - Part Number Chart PDF

Product Options

£895.00

This product is currently out of stock

Product Code AQURHA5V57
Condition New

This field is required.
Top
This item has been added to your cart...