UK Freight only 8.75
Capillary Thermometer / Temperature Gauge, Polyamide Case, for Panel Mounting 0-120c
  • Click to enlarge

Capillary Thermometer, With Polyamide Case, For Panel Mounting, 0-120c

A low cost Capillary Thermometer with Lightweight Acrylic Case

These thermometers do not require any power, so are ideal for mounting in locations where power is not available, is not reliable, or is scarce. The Capillary is supplied permanently fitted to the gauge, and is run to an area where the temperature needs to be monitored, the Dial can then be mounted remotely into a panel

The phial can be taped, tied, or glued to any surface, there is also a "Phial Pocket" available which can be screwed into a vessel so that the phial measures the temperature of the liquid around the Phial Pocket

Specification
Nominal Size37 mm
Cut Out Required37.5 mm
Range0°C to +120°C
Scales°C Only (Black with White Graphics)
Case & BezelABS / Nylon
DialStoved Enamel on Aluminium
Capillary MaterialCopper;
PVC Sheathed
Capillary Length1500 mm
Bulb MaterialBrass
Bulb Length25 mm
Bulb Diameter6.5 mm for 0 to 120°C
OPTIONAL Pocket MaterialBrass or Copper
OPTIONAL Pocket Length50 mm or 100 mm (Including Hex)
OPTIONAL Pocket Diameter (Internal)10 mm
OPTIONAL Pocket Diameter (External)12.5 mm
OPTIONAL Pocket ThreadBSPT (BSP Taper Male)
WindowShatterproof Acrylic
Dial LegendStoved Enamel on Aluminium
MovementPhosphor Bronze Spiral (Hydrocarbon Liquid Expansion)
AccuracyEC Class 2 (UNI EN 13190:2003); ±3.0% Full Range
Ingress ProtectionIP 40 as per EN 60529

Also available FOR 0-120°c GAUGES ONLY (Shown Below) is a Brass, or Stainless Steel 304/316 Thermowell / Pocket. These can be useful if the bulb on the thermometer needs to enter pipework - the pocket is 50mm or 100mm long beyond the 1/2"BSP male thread, and these can be fitted through the branch in a 3/4" tee piece, these can be selected in the options below

Product Options

£19.00


Product CodeCAPC260
ConditionNew

This field is required.
Top
This item has been added to your cart...