UK Freight only 8.75
Conical / Cone Bottom, Food Grade LDPE Tank, 120 Litre
  • Click to enlarge

Conical / Cone Bottom, Food Grade LDPE Tank, 120 Litre

A Conical Bottomed Tank, very popular for producing bio-diesel, Fermenting Beer, and also for the storage of any other liquids or powders that are not chemically agressive to LDPE - Low Density Polyethylene, or the brass insert in the bottom.

Features a 2.25" Brass Thread in the side, which is positioned to accept a 18" Immersion Heater, this port is blanked off by solid moulding, until such time that it is required, then the center can be drilled out with a hole saw enabling the element to be fitted and scrwwed into the thread. It also has a 1"BSP Female threaded bottom outlet, and screwed cap of 4" Internal Diameter, which can be made air-tight for protection against fumes by means of cutting a rubber gasket. The tank is also available without the 2.25" Threaded Insert.

If you need to breach the side of the tank to fit additional process equipment then you will also find Brass Cylinder Flanges useful

These tanks also feature a flat section in the tank wall to ease the installation of additional process equipment

Made in England!

IMPORTANT - SEE IMAGE BELOW. DUE TO THE WAY THESE ARE MADE, THEY HAVE A SMALL TROUGH AROUND THE BOTTOM DRAIN PORT WHICH WILL NOT DRAIN, THIS IS APPROX 3.5" DIA AND 1" DEEP, IF THIS IS A PROBLEM DO NOT BUY IT AS TO/FRO FREIGHT CHARGES WILL APPLY.

Specification
Height 860 mm
Diameter 585 mm (Will accept a horizontally mounted heating device of 18")
Mounting Ring Diameter 530 mm
Actual Conical Length 470 mm
Top Entry Diameter 100 mm
Bottom Outlet Fitting 1" BSP Female Threaded
Side Fitting 2.25"BSP Female Threaded (Requires drilling - through)
Weight 7Kg
Material FOOD GRADE, Opaque Virgin LDPE
Capacity 120 Litres

 

Product Options

£117.00


Product Code CO005
Condition New

This field is required.
Top
This item has been added to your cart...