Shop by Category

Conical Food Grade LDPE - Polyethylene Tank, 60 Litre

Product Information

Conical, Food Grade, LDPE - Polyethylene Tank

A Conical Bottomed Tank, very popular for producing bio-diesel, Fermenting Beer, and also for the storage of any other liquids or powders that are not chemically agressive to LDPE - Low Density Polyethylene, or the brass insert in the bottom.

Features a 2.25" Brass Thread in the side, which is positioned to accept a 14" Immersion Heater, this port is blanked off by solid moulding, until such time that it is required, then the center can be drilled out with a hole saw enabling the element to be fitted and scrwwed into the thread. It also has a 1"BSP Female threaded bottom outlet, and screwed cap of 4" Internal Diameter, which can be made air-tight for protection against fumes by means of cutting a rubber gasket.

If you need to breach the side of the tank to fit additional process equipment then you will also find Brass Cylinder Flanges, Steel Bulkhead Connectors, and Polypropylene Flanged Connections with Backnut useful

These tanks also feature a flat section in the tank wall to ease the installation of additional process equipment

Made in England!

Height 600 mm
Diameter 400 mm (Will accept a horizontally mounted heating device of 14")
Mounting Ring Diameter 340 mm
Actual Conical Length 200 mm
Top Entry Diameter 100 mm
Bottom Outlet Fitting 1" BSP Female Threaded
Side Outlet Fitting 2.25" BSP Female Threaded
Weight 3.4Kg
Material FOOD GRADE, Opaque Virgin LDPE
Capacity 61 Litres

Product Options:

Spare - Screw Cap (£8.50)
Tank With 2.25" Blank Port (£94.00)

Product Code: CONX91


Customers who bought this also bought…

Mobile Site