FAG Fuel Particulate Filters
General purpose, cast-aluminium head filters for use with fuels and oils
The filter element is available in a 100 Micron (0.1mm) 304 Stainless Steel mesh, supported in a rigid nylon frame, this can be removed and washed thoroughly time and time again
The filter bowl is available in cast aluminium
Compression fittings can be found HERE, Screwed fittings can be found HERE
Thread sealant for your choice of inlet fittings can be found in our Sealants section, we recommend either PTFE HERE, or Heldite HERE
Made in Italy
General Specification
| Micron Rating of Washable Stainless Steel Element |
100 |
| Micron Rating of Disposable Paper Element |
15 |
| Dispensing Means |
Gravity or Pumped |
| Inlet / Outlet Fittings |
1/4" BSP Female |
| Diameter |
TBC |
| Depth |
TBC |
| Flow Max |
35 lph |
Manufacturers & Part Numbers
| Type |
Manufacturer |
Manufacturers Part Number |
Max Temperature |
Max Pressure |
Replacement Filter Link |
| Aluminium Bowl, Stainless Steel Element |
FAG |
Unknown |
90°c |
Unknown |
HERE |
When replacing elements in filter housings with screw-on bowls we always recommend the use of Silicon O Ring Grease to aid tightening of the bowl, preventing pinching & scuffing and thus prolonging the life of the O Ring
