UK Freight only 8.75
Flexible Impeller Pump, Shaft Driven / Drill Powered (Nylon), 50 lpm With Hose Tails
  • Click to enlarge

Self Priming, Drill Operated Pump, With Hose Tails

A flexible-impellor pump, for use with any fluids that are not chemically agressive to its component materials. Popular for transferring diesel, kerosene, motor oil, fresh water, and salt water

2-Bolt surface mounting foot plate

Fully self priming from 3m above the liquid source

Must NOT be run dry for more than 30 seconds

Complete with Hose Tails in Nylon material. These are available to suit 3/4" or 1/2" Hose. 1/2" Hose being the same as a garden hose pipe

Wetted Components
Pump Body Nylon
Impellor Case Nylon
Impellor Case Seal NBR
Motor Shaft Seal NBR
Vanes Not Present
Vane Springs Not Present
Rotor / Gear / Impellor NBR
Shaft Key / Nut Not Present
Motor Shaft Stainless Steel
Bypass Valve Piston Not Present
Bypass Valve Seal Not Present
Bypass Valve Spring Not Present
Performance
Voltage / Frequency None, Shaft Driven
kW NA
Amps NA
RPM 3000
Duty Cycle Continuous
Cable Length Not Present
Bypass Valve Y/N N
Max Flow 50 lpm @ 0 m head
Discharge Pressure 2.0 Bar Working, 3.0 Bar Max
Max Suction Lift (Dry) 3.0 m
Max Suction Lift (Wet) 4.0 m
Inlet Fitting 3/4" BSP Male
Outlet Fitting 3/4" BSP Male
Max Particle Tolerance 2000 Micron
Max Liquid Temp 40 Celcius
Min Liquid Temp  
Max Room Temp 40 Celcius
Min Room Temp  
Thermal Protection Y/N N
Max Liquid Viscosity  
Ingress Protection Waterproof

Product Options

£16.50


Product Code SELA20
Condition New

This field is required.
Top
This item has been added to your cart...