Toolzone, Flexible Impeller Pump, Shaft Driven / Drill Powered (Nylon), 50 lpm
A flexible-impellor pump, for use with any fluids that are not chemically agressive to its component materials. Popular for transferring diesel, kerosene, motor oil, fresh water, and salt water
2-Bolt surface mounting foot plate
Fully self priming from 3m above the liquid source
Must NOT be run dry for more than 30 seconds
Wetted Components| Pump Body | Nylon |
| Impellor Case | Nylon |
| Impellor Case Seal | NBR |
| Motor Shaft Seal | NBR |
| Vanes | Not Present |
| Vane Springs | Not Present |
| Rotor / Gear / Impellor | NBR |
| Shaft Key / Nut | Not Present |
| Motor Shaft | Stainless Steel |
| Bypass Valve Piston | Not Present |
| Bypass Valve Seal | Not Present |
| Bypass Valve Spring | Not Present |
Performance| Voltage / Frequency | None, Shaft Driven |
| kW | NA |
| Amps | NA |
| RPM | 3000 |
| Duty Cycle | Continuous |
| Cable Length | Not Present |
| Bypass Valve Y/N | N |
| Max Flow | 50 lpm @ 0 m head |
| Discharge Pressure | 2.0 Bar Working, 3.0 Bar Max |
| Max Suction Lift (Dry) | 3.0 m |
| Max Suction Lift (Wet) | 4.0 m |
| Inlet Fitting | 3/4" BSP Male |
| Outlet Fitting | 3/4" BSP Male |
| Max Particle Tolerance | 2000 Micron |
| Max Liquid Temp | 40 Celcius |
| Min Liquid Temp | |
| Max Room Temp | 40 Celcius |
| Min Room Temp | |
| Thermal Protection Y/N | N |
| Max Liquid Viscosity | |
| Ingress Protection | Waterproof |
Customers who bought this also bought…
