UK Freight only 8.75
FLUX FDM 12 Diaphragm Pumps, 55 lpm
  • Click to enlarge

FLUX Diaphragm Pumps, Type FDM 12

Flux Air operated diaphragm pumps are genuine all rounders for the safe, reliable, and careful (no shearing) transfer of thin to high viscosity products, even with solids in suspension, as well as abrasive, or aearated liquids. Each pump model is available in different versions because of a great variety of possible material combinations of the wetted component parts

A Pressure Controller with Filter & Speed Regulator is also available, you will need these to ensure that you do not over pressurise or contaminate your pump. If you purchase with the pump then the pump will arrive with the device fitted ready for use

  • Self Priming, even from dry
  • Variable delivery rates, by simply adjusting air pressure to the pump
  • No need of bypass control
  • No leakage risk, due to absence of shaft seal
  • Pumps are submersible
  • Unbalanced air valve design eliminates stalling
  • Ideal for use in hazardous areas
  • No overloading, pump will stop in case of closed outlet
  • Suitable for dry operation
Performance
Flow Rate (Max) 55 lpm
Operating Pressure 7 bar
Max Particle Size 2.4 mm
Suction Head Dry 3.0 m
Suction Head Wet 7.6 m
Connections
Pump Suction Side 1/2" NPT Female
Pump Delivery Side 1/2" NPT Female
Air Inlet 3/4" NPT Female
Material Options
Part Number Pump Housing Diaphragm & Seals Weight Max Temperature (C)
M12 40 110 PP PTFE 3.4 kg 60
M12 40 210 PP Santoprene (PP/EPDM) 3.4 kg 60
M12 40 010 PP CR (Neoprene) 3.4 kg 60
M12 60 010 PVDF PTFE   90
M12 50 010 Acetyl (Conductive) PTFE   65
M12 10 100 Aluminium PTFE   90
M12 10 000 Aluminium Santoprene (PP/EPDM)   100
M12 10 200 Aluminium NBR   80
M12 20 000 Stainless Steel PTFE 6.6 kg 90

**SPECIAL ORDER ITEM** - If urgent please email before ordering

FOR OPTIONS WITHOUT PRICES PLEASE CONTACT US FOR A QUOTE

Product Options

£555.00


Product Code REKM20
Condition New

This field is required.
Top
This item has been added to your cart...