UK Freight only 8.75
FLUX FDM 25 Diaphragm Pumps, 150 lpm
  • Click to enlarge

FLUX Diaphragm Pumps, Type FDM 25

Flux Air operated diaphragm pumps are genuine all rounders for the safe, reliable, and careful (no shearing) transfer of thin to high viscosity products, even with solids in suspension, as well as abrasive, or aearated liquids. Each pump model is available in different versions because of a great variety of possible material combinations of the wetted component parts

A Pressure Controller with Filter & Speed Regulator is also available, you will need these to ensure that you do not over pressurise or contaminate your pump. If you purchase with the pump then the pump will arrive with the device fitted ready for use

  • Self Priming, even from dry
  • Variable delivery rates, by simply adjusting air pressure to the pump
  • No need of bypass control
  • No leakage risk, due to absence of shaft seal
  • Pumps are submersible
  • Unbalanced air valve design eliminates stalling
  • Ideal for use in hazardous areas
  • No overloading, pump will stop in case of closed outlet
  • Suitable for dry operation
Flow Rate (Max) 150 lpm
Operating Pressure 8 bar
Max Particle Size 3.0 mm
Suction Head Dry 6.5 m
Suction Head Wet 7.6 m
Pump Suction Side G 1" Female
Pump Delivery Side G 1" Female
Air Inlet 1/4" NPT Female
Material Options
Part Number Pump Housing Diaphragm & Seals Weight Max Temperature (C)
M25 40 100 PP PTFE   60
M25 40 000 PP CR (Neoprene)    
M25 40 010 PP Santoprene    
M25 60 000 PVDF PTFE   90
M25 10 100 Aluminium PTFE 8.4 kg 90
M25 10 000 Aluminium NBR 8.4 kg 80
M25 20 100 Stainless Steel PTFE 15.3 kg 90

**SPECIAL ORDER ITEM** - If urgent please email before ordering


Product Options


Product Code REKP20
Condition New

This field is required.
This item has been added to your cart...