FLUX Diaphragm Pumps, Type FDM 50
Flux Air operated diaphragm pumps are genuine all rounders for the safe, reliable, and careful (no shearing) transfer of thin to high viscosity products, even with solids in suspension, as well as abrasive, highly flammable, or aearated liquids. Each pump model is available in different versions because of a great variety of possible material combinations of the wetted component parts
APPROVALS
ATEX - 94/9/EC-ATEX100a, Ex II 2 G D X
A Pressure Controller with Filter & Speed Regulator is also available, you will need these to ensure that you do not over pressurise or contaminate your pump. If you purchase with the pump then the pump will arrive with the device fitted ready for use
- Self Priming, even from dry
- Variable delivery rates, by simply adjusting air pressure to the pump
- No need of bypass control
- No leakage risk, due to absence of shaft seal
- Pumps are submersible
- Unbalanced air valve design eliminates stalling
- Ideal for use in hazardous areas
- No overloading, pump will stop in case of closed outlet
- Suitable for dry operation
Performance
| Flow Rate (Max) |
525 lpm (Plastic), 730 lpm (Metal) |
| Operating Pressure |
8 bar |
| Max Particle Size |
6.4 mm |
| Suction Head Dry |
4.0 m |
| Suction Head Wet |
7.6 m |
Connections
| Pump Suction Side |
G 2" Female |
| Pump Delivery Side |
G 2" Female |
| Air Inlet |
3/4" NPT Female (Metal) |
Material Options
| Part Number |
Pump Housing |
Diaphragm & Seals |
Weight |
Max Temperature (C) |
| M50 10 300 |
Aluminium |
PTFE |
|
90 |
| M50 10 200 |
Aluminium |
Geolast (PE/NBR) |
|
|
| M50 20 300 |
Stainless Steel |
PTFE |
|
90 |
| M50 30 200 |
Cast Iron |
Geolast (PE/NBR) |
60.0 kg |
|
| M50 10 400 |
Aluminium |
Geolast (PE/NBR) |
|
|
| M50 30 300 |
Cast Iron |
PTFE |
60.0 kg |
|
| M50 30 400 |
Stainless Steel |
Geolast (PE/NBR) |
|
|
| M50 20 400 |
Cast Iron |
Santoprene |
60.0 kg |
100 |
**SPECIAL ORDER ITEM** - If urgent please email before ordering
FOR OPTIONS WITHOUT PRICES PLEASE CONTACT US FOR A QUOTE
