FMT SwissAG DC Vane Pumps, 35 lpm
A top quality, Self-Priming, Sliding-Vane pump, for use with Diesel
Wetted ComponentsPump Body | Aluminium |
Impellor Case | Aluminium |
Impellor Case Seal | NBR |
Motor Shaft Seal | NBR |
Vanes | PEI (200 Times harder than Acetyl) |
Vane Springs | Not Present |
Rotor / Gear / Impellor | Steel |
Shaft Key / Nut | Steel |
Motor Shaft | Steel |
Bypass Valve Piston | Acetyl Resin |
Bypass Valve Seal | NBR |
Bypass Valve Spring | Stainless Steel |
PerformanceFMT Part Number | 23-012 | 23-012-824 |
Voltage / Frequency | 12vDC | 24vDC |
kW | 0.22 | 0.32 |
Amps | 18 | 13 |
RPM | 3300 | 3300 |
Duty Cycle | 30 mins | 30 mins |
Cable Length | 3m C/W Crocodile Clips | 3m C/W Crocodile Clips |
Bypass Valve Y/N | Y | Y |
Max Flow (Open) | 35 lpm | 35 lpm |
Discharge Pressure | 1.6 Bar | 1.6 Bar |
Max Suction Lift (Dry) | 3.0 m | 3.0 m |
Max Suction Lift (Wet) | 3.0 m | 3.0 m |
Inlet Fitting | 3/4" BSP | 3/4" BSP |
Outlet Fitting | 3/4" BSP | 3/4" BSP |
Max Particle Tolerance | 100 Micron | 100 Micron |
Max Liquid Temp | 40 Celcius | 40 Celcius |
Min Liquid Temp | | |
Max Room Temp | 40 Celcius | 40 Celcius |
Min Room Temp | | |
Thermal Protection Y/N | Y | Y |
Max Liquid Viscosity | Diesel | Diesel |
Ingress Protection | IP54 | IP54 |
Download FMT 12vDC 35 LPM Pump, NBR Seals - Technical Spec PDF
Download FMT 24vDC 35 LPM Pump, NBR Seals - Technical Spec PDF