Shop by Category

Oilybits RPC-101 Raw Power Extreme Spinning Bowl Centrifuge

Product Information

Oilybits RPC-101 'Raw Power Extreme' Spinning Bowl Centrifuge

The Raw Power centrifuge is an american designed & manufactured, high quaity, high precision, high speed spinning bowl centrifuge, for general centrifugal separation of liquids which are not agressive to the macines component materials

Unlike Oilybits OB Series Centrifuge, the Raw Power centrifuge does not use any of the incoming oil for essential lubrication, and therefore everything that passes through the centrifuge had been 'cleaned' to some extent, the slower the centrifuge is fed, the greater the extent of cleaning

The Raw Power Centrifuge does not use filters, no waste media is created in using the machine, it also does not utilize a pump, and therefore the oil that goes in can be contaminated to a greater extent than oil which needs to pass through a pump into a filtering device

The Raw Power Centrifuge is supplied as standard with a 'Bowl Performance Optimizer', This increases the efficiency of the centrifuge for ultimate in cleaning performance while maintaining the easy and quick cleaning ability of the open bowl design. The optimizer bolts on to the rotor with no modification and does not need to be removed when cleaning bowl. The optimizer gets the oil spinning prior to entering the centrifuge bowl. This reduces the turbulence in the bowl. Also, the booster feeds the incoming/dirty oil into the bottom of the centrifuge bowl, forcing the dirty oil to have to work its way through the entire batch of existing oil in the bowl

These centrifuges are also popular for recovering precious metals in jewellery manufacture, offcuts, swarf, chips, and pastes from polishing can all be recovered or seprated from oils and coolants in a centrifuge, without any valuable metal being trapped in a filter element and lost

Specification
Flow Rate Dependent on Media
Voltage 110-230v50Hz Phase controller (supplied), powering a 230v 60Hz motor
RPM 6000
Centrifuge Bowl Inside Diameter 190.5 mm
G-Force at Cleaner Wall 3824 G
Centrifuge Bowl Dirt Holding Capaciy 0.7 Litres
Overall Width 40 cm
Overall Depth 40 cm
Overall Height 50 cm
Weight 23 Kg
Inlet / Outlet Connection 3/4" Hose Barb
Suitable for Water, Diesel, WVO, Motor Oil, Biodiesel, ATF, Gear Oil Etc
Max Temp 400 Farenheit

Shown Below: Centrifuge with lid off

Shown Below: Included Performance Optimizer

Shown Below: Optional Heating Element - aids separation by making oil less viscous

NOTE: THIS ITEM IS SPECIAL ORDER FROM THE U.S.A, THERE WILL BE A 2 WEEK LEAD TIME EXW U.K. FROM RECIEPT OF PAYMENT

Product Options:

Bolt-on Heater (£240.00)
Volts - 110vAC 50Hz (£1,615.00)
Volts - 230vAC 50Hz (£1,615.00)

Product Code: OILI5A3K144

Quantity:

Customers who bought this also bought…

Mobile Site