Thermoprobe, TL1-A Laboratory Thermometer, ATEX Approved
The TL1-A intrinsically safe thermometer is intended to be used anywhere a precision glass stem thermometer or other type thermometer may be used.
The TL1-A is an improved version of the original ThermoProbe model TL1. The TL1-A incorporates glass thermometer simplicity and reliability with the ease of a digital display. Like precision mercury thermometers, the TL1-A has accuracy, repeatability and long-term stability. But unlike those thermometers there will never be problems with mercury separation or hazardous material cleanup. Different from most electronic thermometers, the “Cordless” TL1-A has no wires to get in the way or break. Battery replacement is easily done through a sealed cover. Encoded calibration is unaffected by temperature, vibration, or battery removal. Low battery display, and failure mode indications protect the user from false data.
4 Point NIST Traceable Calibration and a one year warranty included.
Features
- Auto-Off after 20 minutes to save battery life
- Minimum & maximum readings
- Avergaing
- Easy °F to °C Switching
- Display arrows indicate increasing or decreasing temperature activity
On / Off Button Features:
Function Button Features:
Used to access the following operations:
- Min
- Max
- Avergaed °F / °C
- Resolution
Typical Applications:
Distillations, temperature baths, melting point tests, flash point tests, reference, thermowells, provers, temperature calibration for flow meters.
Typical Industries:
Laboratory, Petroleum, Pipeline, Pharmaceutical, Food
ATEX Certification: CE0359 Ex // 11 2 G Ex ib IIC T4 // DEMKO 11 ATEX CO09993X // IECEx ULD 11.0009X
SpecificationsDisplay: | LCD with 0.25 inch characters Trend Indicating Arrows Low Battery & Fault indication |
User Functions: | Auto Off after 20 minutes or continuous operation Lowest Reading, Highest Reading, Average Reading Switchable in Units of °F or °C Display tenths or hundredths resolution |
Construction: | Stainless Steel temperature sensor Standard Sensor length 8” (20cm) Standard diameter 1/4” (6.35mm) with reduced diameter tip of 3/16” (4.76mm) Sensor mount acetyl plastic Electronics and display in 3.5” x 1.2” anodized Aluminum enclosure Molded Silicone seal Highly durable display window, graphics and membrane switches |
Weight: | 3 ounces, 93 grams |
Temperature: | Resolution 0.01 Degrees Calibrated Accuracy: ±0.1°F from 14 to 320°F ±0.06°C from -10 to 160°C NIST Traceable Report of Test |
Temperature Time Constant: | 8 seconds in circulated water bath (63.2% response to temperature change) |
Electronics: | Ultra Low Power Microcontroller FLASH Memory 20 bit A/D Converter Recommended Ambient Temperature Range for Best Accuracy 32 to 112 °F, 0 to 44°C |
Sensor: | 100 Ohm, Class A 1/3 DIN RTD Immersion depth 4”, 11cm |
Battery: | 20mm Coin Size 3V Lithium, Duracell DL2032(IEC CR2032) Over 100 hours Service Life at 70°F, 21°C Battery Operating Range -4 to 130°F, -20 to 54°C Note: Battery may not provide adequate power if ambient temperature is below -4°F, -20°C or above 130°F, 54°C |
Product OptionsTL1A-04 | TL1-A Thermometer, 4 in. (10cm) sensor length, (No I.S. Certification), Ambient temperature range -20°C to +40°C, includes hard carry case |
TL1A-06 | TL1-A Thermometer, 6 in. (15cm) sensor length, (No I.S. Certification), Ambient temperature range -20°C to +40°C, includes hard case |
TL1A-08 | TL1-A Thermometer, 8 in. (20cm) sensor length, ATEX/IECEx Certification (II 2 G Ex ib IIC T4), Ambient temperature range -20°C to +40°C, includes hard case |
TL1A-10 | TL1-A Thermometer, 10 in. (25cm) sensor length, ATEX/IECEx Certification (II 2 G Ex ib IIC T4), Ambient temperature range -20°C to +40°C, includes carry holster |
TL1A-12 | TL1-A Thermometer, 12 in. (30cm) sensor length, ATEX/IECEx Certification (II 2 G Ex ib IIC T4), Ambient temperature range -20°C to +40°C, includes carry holster |
TL1A-14 | TL1-A Thermometer, 14 in. (35cm) sensor length, ATEX/IECEx Certification (II 2 G Ex ib IIC T4), Ambient temperature range -20°C to +40°C |
TL1A-16 | TL1-A Thermometer, 16 in. (40cm) sensor length, ATEX/IECEx Certification (II 2 G Ex ib IIC T4), Ambient temperature range -20°C to +40°C |
TL1A-18 | TL1-A Thermometer, 18 in. (46cm) sensor length, ATEX/IECEx Certification (II 2 G Ex ib IIC T4), Ambient temperature range -20°C to +40°C |
TL1A-24 | TL1-A Thermometer, 24 in. (60cm) sensor length, ATEX/IECEx Certification (II 2 G Ex ib IIC T4), Ambient temperature range -20°C to +40°C |
TL1ACBL | TL1-A Thermometer, Custom Cable Probe Assembly (No I.S. Certification) |
Customs Tariff CodesArticle | Tariff Code |
Digital Thermometers | 9025190090 |
Download Thermoprobe TL1-A Laboratory Thermometer - Data Sheet PDF