UK Freight only 8.75
ZVA Slimline TD, ATEX Approved Automatic Chemical Nozzle (80 lpm)
  • Click to enlarge

ZVA Slimline TD, ATEX Approved Automatic Chemical Nozzle (80 lpm)

Aluminium Body, Anodised Aluminium Spout, FEP (PTFE) Seals

Suitable only for wet hose delivery, not for gravity flow.

  • Patented venturi type automatic shut-off with safety cut-out attitude valve.
  • Built-in check valve
  • 3-speed lever latch with removeable latch pin EB 280

Suitable For;

  • Aliphatic Hydrocarbons: Petrol/Gasoline, Diesel, Jet Fuels, Diesel, Fuel Oils, Kerosene
  • Aromatic Hydrocarbons: Benzene, Toluene, Xylol
  • Chlorinated Hydrocarbons: Trichloroethylene, Perchloroethylene, Carbon Tetrachloride
  • Methylene Chloride
  • Cohols, Commercial: Ethyl, Butyl, Isopropyl, Methyl Alcohol, Methanol, M100, Ethanol
  • Ester, Acetates, Ether: Acetic Ester, Ethyl Acetate, Butyl Acetate, Ethyl Ether, Dimethyl Ether, Amines
  • Ketones, Aldehydes: Acetone, Anone, Methyl Ethyl Ketone, Acet/Benz/Formaldehyde
  • Glycols, Glycerine, Glysantin, Defrosting Fluids, Anti-Freezing Fluids containing Water

Nozzles supplied will be ZVA 'Slimline 2', the replacement for the original ZVA Slimline, the only difference between the two models being the hand grip pattern. Actual picture shown above is of the ZVA Slimline 2

Approved for use in ATEX areas - SIRA Certificate Number 03ATEX9487U, Category - Ex II 1 G

There are various options available for ZVA Slimline Nozzles, these include a choice of Guard, and Spout patterns. Most of the time a Standard Guard (Guard No 4) and Spout (Spout Length 185 mm) are used, however for existing installations where the dispensing pump system has been designed to accept a specific (or older) style of Guard or Spout, then the correct style can be selected to ensure compatibility with the Nozzle Holster

PLEASE NOTE THAT DUE TO NOZZLES BEING MADE TO ORDER, THERE IS A 30.00 GBP CHARGE FOR NOZZLES ORDERED INCORRECTLY THAT NEED TO BE RE-WORKED

Specification
Inlet Various, Consult Chart
Spout Diameter 24.5 mm
Trigger Catch Yes, 3 Position
Swivel Included Yes
Min Flow rate 0 lpm
Max Flow rate 80 lpm
Min Back Pressure 7 PSI / 0.5 Bar
Max Back Pressure 50 PSI / 3.5 Bar
Weight 1.1 Kg
Wetted Components
Body Alumminium
Seals

FEP (PTFE)

Spring Stainless Steel
Main Stem Brass
Valve Seat Acetyl Resin (Delrin)
Diaphragm PTFE
Swivel Stainless Steel
Lever Rilsan Coated Stainless Steel
Guard Style Spout Style Inlet Type Hose Connection Spout Length Spout Material Boot Colour Part Number
EG281.1 ER242.1 Swivel 1"BSP Male 185 mm Anodised Aluminium Black ZVA 1.0 TD
EG281.1 ER242.1 Swivel 1"BSP Female 185 mm Anodised Aluminium Black ZVA 1.1 TD

Other guard styles available upon request:

Splash Guards Material Part Number
Splash Guard - GREEN (Petrol Only) PVC ZVA SGG
Splash Guard - BLACK (Diesel Only) PVC ZVA SGB
Splash Guard - RED (Diesel Only) PVC ZVA SGR
Splash Guard - YELLOW (Diesel Only) PVC ZVA SGY
Alternative Colour Boots for Diesel Nozzles Material Part Number
Boot - RED PVC ZVA EK 144 R
Boot - YELLOW PVC ZVA EK 144 Y
Boot - BLUE PVC ZVA EK 144 BU

Download ZVA Slimline - Datasheet PDFDownload ZVA Slimline - Datasheet PDF

Product Options

£271.90


Product Code ZVA8G0YK92
Condition New

This field is required.
Top
This item has been added to your cart...