Shop by Category

Giuliani Anello Fuel Filters, 3/8" BSP

Product Information

Giuliani Anello Fuel Particulate Filters

General purpose, cast-aluminium head filters for use with fuels and oils

The filter element is available in 15 Micron Paper (Disposable), or a 100 Micron (0.1mm) 304 Stainless Steel mesh, supported in a rigid nylon frame, this can be removed and washed thoroughly time and time again

The filter bowl is available in cast aluminium, or clear polycarbonate for visual inspection of the filter condition

Compression fittings can be found HERE, Screwed fittings can be found HERE

Thread sealant for your choice of inlet fittings can be found in our Sealants section, we recommend either PTFE HERE, or Heldite HERE

An optional mounting bracket is also available, shown here:

Made in Italy

General Specification
Micron Rating of Washable Stainless Steel Element 100
Micron Rating of Disposable Paper Element 15
Dispensing Means Gravity or Pumped
Inlet / Outlet Fittings 3/8" BSP Female
Diameter 65 mm (Approximate)
Depth 75 mm (Approximate)
Flow Max 35 lph
Manufacturers & Part Numbers
Type Manufacturer Manufacturers Part Number Max Temperature Max Pressure Replacement Filter Link
Clear Bowl, Paper Element Giuliani Anello Unknown 50°c Unknown HERE
Clear Bowl, Stainless Steel Element Giuliani Anello W-4ST-38/01L 50°c Unknown HERE
Aluminium Bowl, Paper Element Giuliani Anello W-4STM-38/0010P 90°c Unknown HERE
Aluminium Bowl, Stainless Steel Element Giuliani Anello Unknown 90°c Unknown HERE

For all filters with screw-on bowls we always recommend the use of Silicon O'Ring Grease to aid tightening of the bowl, preventing pinching & scuffing and thus prolonging the life of the O'Ring

Product Options:

Bracket (£2.71)
Clear Bowl, Paper Element (£6.25)
Clear Bowl, SS304 Element (£7.08)
Metal Bowl, Paper Element (£9.58)
Metal Bowl, SS304 Element (£6.25)
Super Lube O'Ring Grease (£3.29)

Product Code: FI005

Quantity:

Mobile Site