Location: Oil & Gas
Oil & Gas
Carbon Steel Pipe (TATA) Screwed and Plain Ends
Carbon Steel Pipe (Imported) Screwed and Plain Ends
Galvanised Steel Pipe (TATA) Screwed and Plain Ends
Galvanised Steel Pipe (Imported) Screwed and Plain Ends
Pipe Flanges, ASME B16.5 & BS EN 1092-1 / DIN (PN) Standard, 150 & 300 LB
Pipe Flange Gaskets
Full Face Flange Gaskets, All Sizes, EPDM
Full Face Flange Gaskets, All Sizes, PG-O (Non Asbestos)
Flange Nut, Bolt & Washer Sets, A2, 304 Stainless Steel
Threaded Pipe Fittings, Black / Cast Iron and 316 Stainless Steel, to EN10242 / EN1256 & BS143
Isolation Valves
From Threaded to Flanged in many Materials, in sizes from 1/8" to 10" NB, with larger sizes upon request. Main Menu HERE
Drain Valves with Dead-Man Spring-Return Handles
Drain Valves with Dead-Man Spring-Return Handles, in 304 & 316 Stainless Steel, from 1/4" to 2" NB, Main Menu HERE
Oil Filters
- Giuliani Anello filters are available up to DN50 (2") DIN Flanged with built-in heating elements, magnetic columns, manual or motorised self-cleaning filters.
- Maide Machine Co. DN150 (6") DIN/ASME Flanged filter with built-in Air-Eliminator.
- Cim-Tek 'Viking' Single or Multiple (2, 4, or 8) bag filter housings up to DN100 (4"), 500GPM Flow Rate.
Free Water Detection
Oilybits offer a range of Gauging Pastes for the identification of free water in bulk fuel storage tanks, some of the pastes we offer are:
- McCabe H2O Plus Water Level Indicator Paste
- Kolor Kut Water Finding Paste
- Vecom Water Finder Special Paste
A special "Water Finding Rule" is also available, for use with the pastes.
Bulk Fuel Storage Tank Sampling
Oilybits offer a range of Sampling Gauges for the sampling of bulk fuel storage tanks, our full range of samplers can be found here: Sampling Gauges
For Offshore use we always recommend the use of ATEX approved samplers, and so the range is limited to the following products in conjunction with an ATEX Approved Hand-Winch for the lowering and retrieval of the sampler:
- Fuel Sampler/Thief, Spot/Any Level (ALS)
- Fuel Sampler/Thief, Bottom (BTMS)
- Fuel Sampler/Thief, Multi-Functional: Any-Level & Bottom (ALBTMS)
- Fuel Sampler/Thief, Multi-Functional: Spot, Running & All Level (ALSB-V)
- Winder Mk 1A, 32m, Auto-Locking, for Fuel Samplers up to 1.5kg
Bulk Fuel Storage Tank Dipping
Oilybits offer the Richter brand of tank dipping tapes, the purpose of dipping tapes is to categorically confirm the depth in the tank where an electronic gauge may not be trusted to perform the duty, at the same time as the depth is measured the fuel may also be sampled. The full range of Richter tapes can be found here: Richter Dipping Tapes
For all bulk storage applications, Oilybits recommend the use of IPM (Institute of Petroleum Measurement) Specification (Class I EC Accuracy) '464' tapes in 4021 Etched Stainless Steel, 'MS' Brass Frame with Wooden Handle, 'E' Grounding Cable & Clip, 'B/IPM8' Brass 675G Weight, 3-Point Factory Calibration Certificate, and '556' Carry Case:
Oil Level Gauging Pastes
In conjuction with a dipping tape, the user may use a proprietary oil level gauging paste to aid visual identification of the oil level. Oilybits supply a range of Oil Level Gauging Pastes;
Thermoprobe, Petroleum Thermometers
Thermoprobe, TP7-D Petroleum Gauging Thermometers are for obtaining the media temperature at specific levels in a bulk storage tank. They are supplied as standard with Calibration Certificates, and are ATEX approved.
Sample Handling
Various products are offered for the purpose of fuel sampling, including a Grounded Bucket, and a Grounded Funnel. The bucket may be used for transporting contaminated sampling equipment, and the funnel may be used for transferring fuel samples into bottles for laboratory analysis.
- Fuel Sampling Funnel, Stainless Steel, Fitted with Grounding Cable and RACO Clip
- Fuel Sampling Bucket, Stainless Steel with Bottom Band, Fitted With Grounding Cable and RACO Clip. 10L, 12L and 15L
About Our Unique Grounding Cables...
- Manufactured by Oilybits in our U.K. production facility.
- Polyolefin yellow/green stripe, heat shrink cable sheath - the correct colour for earthing applications and fully resistant to Oils, unlike PVC.
- 6mm2 tinned copper, braided cable for greater resistance to acidic / oxidised oils.
- 1m length of cable.
- Cable end terminals are fused with solder to prevent fraying, loosening, and contamination / corrosion of the cable, thereby ensuring a stable ground connection.
- RACO, cast brass, 70mm grounding clip, with red handles.
- 304 stainless steel nuts and bolts throughout, featuring Nyloc Nuts or Shake-proof Washers to prevent loosening, thereby ensuring a stable ground connection.
- Nylon inner seal on vessel bolt, to prevent leakage of contents above the terminal. Oil resistant.
- A superior product to that of our competition.
Grounding Reels
Oilybits offer our Static Grounding Reel, Stainless Steel, ATEX Approved, available fixed or with breakaway joint for Helicopter bonding.
Ground Test Equipment
Systems which transfer flammable liquids must be bonded, or electrically connected in order to safely dissipate static electrical charges, it is important that these systems are tested regularly, because deterioration could result in a hazardous situation developing. The Advanced Continuity Tester (ACT) has been specifically designed for this task ONLY, so it does not sacrifice performance in the interests of being a multi purpose instrument and it is based on the very latest microprocessor technology.
Product Labels
Hazard Labels
Fuel Oil Pumps
Oilybits offer various pumps for bulk fuel oil transfer applications, many of which are ATEX approved and suitable for use with most flammable fuel oils.
Gespa S.A. (Gespasa) Bedplate Vane Pumps, ATEX Approved
GMP, Self-Priming Bedplate Centrifugal Pumps, Cast Iron With Bronze Impeller, ATEX Approved
Elaflex Yellow Band Hose
'Yellow Band' Hoses, up to 10"ID (FHD) suitable for Petroleum based products. This hose is statically bonded, for use in an ATEX Zone.
Option | Size | Characteristics | Uses |
HD | 10-100mm ID | Semi Flexible | Reel Operation |
XHD | 25-75mm ID | Semi Flexible | Reel Operation, Economy |
HD-RV | 60-110mm ID | Highly Flexible | Flexible Pipe Joints |
FHD | 75-254mm ID | Flat | Collapsible Marine Hose |
STW | 50-200mm ID | Semi Flexible | Marine Hose & Gravity Discharge |
Oil & Gas Dry-Break Hose Connectors
Oilybits offer the Gardner Denver TODO range of ATEX approved hose connectors, available for Liquids and Gases.
- TODO-Matic, NATO STANAG 3756 Dry-Break Couplings, ATEX Approved (Up to 6" Flanged, and soon to be available in 8")
- TODO-GAS, Dry-Break Couplings, ATEX Approved (Up to 3" Flanged, larger sizes can be manufactured subject to demand)
Oil & Gas Swivels
- TODO Swivels (Up to 3" Flanged)
UN/IATA Approved Sample Cans, for air transport of flammable products
Oilybits offer the Air-Sea range of UN/IATA approved sample cans and fibreboard outers, these are approved for the air transport of flammable liquids such as fuel samples.
- Air Ratio Control Valves
- Automatic On-Off Valves
- Governors
- Jerk Handle On-Off Valves
- Manually Resetting Valves
- Slam Shut-Off Relief Valves
- Thermostatic Capillary Shut Off Valves
Gas Filters:
Oilybits offer the Giuliani Anello range of filters for Gas, which covers larger pipe sizes and flanged connections, the range includes filters with built-in heating elements, magnetic columns, and manual or motorised self-cleaning filters.