UK Freight only 8.75
Aquametro DOMINO ARD, Rotary Piston, Chemical Flow Meters
  • Click to enlarge

Aqua Metro DOMINO ARD, Rotary Piston, Chemical Flow Meters

Chemical meters with mechanical roller counter in Litres, and with BSP Threaded Fittings as standard.

Measuring Unit and Modules to be ordered seperately.

Not approved for resale use

Your Benefits

  • High operational safety due to vibration resistance
  • Space saving installation without requirement of straight inlet and outlet paths
  • Easy to install without restriction either horizontally or vertically
  • High operational safety due to integral safety filter in the meter inlet. Reduces effort on start-up
  • For chemical liquids with viscosities up to about 10,000 mPa-s
  • Threaded Connections (BRASS Housing)
  • Flanged Connections DIN 2501 / SN 21843 (CAST IRON, BRASS, PTFE Housings)
  • Combinable with all DOMINO modules
  • Special versions in U.S. Gallons or with different flange specifications, such as JIS, available on request
  • Chemical-resistant Yellow RAL1007 enamel finish

All threaded meters from 1/2"DN15, to 1.5"DN40 are supplied complete with BSP threaded Brass Adaptors, which enable the meter to be removed easily should it require inspection / testing. These fittings also enable the meter to be orientated in the desired plane. These fittings are not available for 2"DN50 Meters. Fittings shown below;

IMPORTANT - All meters must be fitted with a pre-filter (see DIRT MESH FILTER SIZE, in chart below). Ingress of particles over the dirt mesh filter size may lead to wear and or jamming of the Rotary Piston, and will not be covered by Warranty.

Selection of commonly measured liquids:

  • Acetic Acid
  • Acetone
  • Animal Fats
  • Ammonia Hydroxide, Ammonia Solution
  • Bromium Hydroxide, Bromic Acid
  • Butyl Acetate, Acetic Butyl Ester
  • Chloroform, Trichloromethane
  • Citric Acid
  • Diethylene Glycol
  • Distilled Water
  • Ethyl Acetate, Acetic Ether, Acetic Ester
  • Ethyl Alcohol, Alcohol, Ethanol
  • Ethyl Ethylene, Ethylene, Diethyl Ethylene
  • Ethylene Glycol
  • Formaldehyde Solution
  • Formic Acid
  • Glycerine
  • Hexine
  • Hydrochloric Acid
  • Hydrofluoric Acid
  • Hydrogen Peroxide, Hydrogen Superoxide
  • Isopropyl Ether, Di-isopropyl Ether
  • Isopropyl Alcohol, Propyl Alcohol
  • Kerosene, Petroleum (More commonly used with Aqua Metro VZO & VZF Range)
  • Liquid Ammonia
  • Liquid Bromium
  • Liquid Butane
  • Magnesium Sulphate
  • Methanol, Methyl Alcohol
  • Methylene Chloride, Dichloromethylene
  • Methyl Ethyl Ketone
  • Molasses (Without Urea)
  • Nitric Acid
  • Paraffin
  • Perchloroethylene, Tetrachloroethylene
  • Phosphoric Acid
  • Potassium Hydroxide, Caustic Potash
  • Propionic Acid
  • Prussic Acid
  • Pure Benzol
  • Sodium Chloride Solution, Brine
  • Sodium Hydroxide, Caustic Soda Solution
  • Sodium Hyperchlorite Solution, Javelle Water
  • Sulphocarbonic Acid
  • Sulphuric Acid, Sulfuric Acid
  • Tar, Pitch
  • Tetrachloromethane, Carbon Tetrachloride
  • Toluene
  • Trichloroethylene (dry)
  • Vegetable Oils
Specification
 ARD 15ARD 20ARD 25ARD 40ARD 50
Nominal Diameter15 mm / 1/2"20 mm / 3/4"25 mm / 1"40 mm / 1.5"50 mm / 2"
Installation Length165 mm165 mm190 mm (260 mm in PTFE)300 mm350 mm
Connection Threads1/2" BSP3/4" BSP1" BSP1.5" BSP2" BSP
Rated Max. Pressure - ARD 1000 - Threaded16 Bar16 Bar16 Bar16 Bar16 Bar
Rated Max. Pressure - ARD 1000 - Flanged25 Bar25 Bar25 Bar25 Bar25 Bar
Rated Max. Pressure - ARD 2000 - Flanged40 Bar40 Bar40 Bar40 Bar40 Bar
Rated Max. Pressure - ARD 3000 - Flanged25 Bar25 Bar25 Bar25 Bar25 Bar
Rated Max. Pressure - ARD 4000 - Flanged10 Bar10 Bar10 Bar10 Bar10 Bar
Maximum Temperature40°c, 50°c, 90°c, 130°c or 180°c, Subject to version40°c, 50°c, 90°c, 130°c or 180°c, Subject to version40°c, 50°c, 90°c, 130°c or 180°c, Subject to version40°c, 50°c, 90°c, 130°c or 180°c, Subject to version40°c, 50°c, 90°c, 130°c or 180°c, Subject to version
Maximum Flow Rate400 lph1,500 lph3,000 lph9,000 lph30,000 lph
Flow in Batching Mode320 lph1,200 lph2,400 lph7,200 lph24,000 lph
Continuous Flow Rate200 lph750 lph1,500 lph4,500 lph15,000 lph
Minimum Flow Rate30 lph60 lph150 lph450 lph1,500 lph
Approx Starting Flowrate6 lph12 lph30 lph90 lph300 lph
Measuring Error±0.5% of effective value±0.5% of effective value±0.5% of effective value±0.5% of effective value±0.5% of effective value
Measuring Error Repeatability±0.1% of reading±0.1% of reading±0.1% of reading±0.1% of reading±0.1% of reading
Smallest Readable Amount0.01 Litres0.1 Litres0.1 Litres0.1 Litres1 Litre
Registration Capacity1,000 Litres10,000 Litres10,000 Litres10,000 Litres100,000 Litres
Safety Filter Mesh Size400 Micron400 Micron400 Micron800 Micron800 Micron
Dirt Filter Mesh Size1000 Micron100 Micron250 Micron250 Micron250 Micron
Volume of Measuring Chamber12 cm336 cm3100 cm3330 cm31,200 cm3
Ingress ProtectionIP65IP65IP65IP65 
Measuring range as a function of material combination
TypeMeasuring ChamberRotary Piston - AluminiumRotary Piston - GraphiteRotary Piston - Stainless SteelRotary Piston - PTFE
ARD 1000Brass5 %5 % 10 %
ARD 2000Stainless Steel5 %5 %10 %10 %
ARD 3000Stainless Steel5 %5 %10 %10 %
ARD 4000PTFE   10 %
Aqua Metro Model Numbers - MEASURING UNIT
TYPEFitting TypeFitting SizePN - BarModelHousingMeasuring ChamberSeal SetRotary PistonArt. No.
ARD 1000Threaded1/2"16ARD 15/1111-A2BrassBrass / PPS2 - FPMA - Aluminium (Max 130c)83000
ARD 1000Threaded1/2"16ARD 15/1111-G2BrassBrass / PPS2 - FPMG - Graphite (Max 130c)83002
ARD 1000Threaded1/2"16ARD 15/1111-P2BrassBrass / PPS2 - FPMP - PTFE (Max 40c)83004
ARD 1000Threaded3/4"16ARD 20/1111-A2BrassBrass / PPS2 - FPMA - Aluminium (Max 130c)83033
ARD 1000Threaded3/4"16ARD 20/1111-G2BrassBrass / PPS2 - FPMG - Graphite (Max 130c)83035
ARD 1000Threaded3/4"16ARD 20/1111-P2BrassBrass / PPS2 - FPMP - PTFE (Max 40c)83036
ARD 1000Threaded1"16ARD 25/1111-A2BrassBrass / PPS2 - FPMA - Aluminium (Max 130c)83058
ARD 1000Threaded1"16ARD 25/1111-G2BrassBrass / PPS2 - FPMG - Graphite (Max 130c)83060
ARD 1000Threaded1"16ARD 25/1111-P2BrassBrass / PPS2 - FPMP - PTFE (Max 40c)83062
ARD 1000Threaded1.5"16ARD 40/1211-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83106
ARD 1000Threaded1.5"16ARD 40/1211-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83108
ARD 1000Threaded1.5"16ARD 40/1211-P2Spherolic Cast IronBrass / PPS2 - FPMP - PTFE (Max 40c)83110
ARD 1000Flanged1/2"25ARD 15/1221-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83005
ARD 1000Flanged1/2"25ARD 15/1221-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83007
ARD 1000Flanged3/4"25ARD 20/1221-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83037
ARD 1000Flanged3/4"25ARD 20/1221-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83039
ARD 1000Flanged1"25ARD 25/1221-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83063
ARD 1000Flanged1"25ARD 25/1221-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83065
ARD 1000Flanged1.5"25ARD 40/1221-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83111
ARD 1000Flanged1.5"25ARD 40/1221-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83113
ARD 1000Flanged2"25ARD 50/1221-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83154
ARD 1000Flanged2"25ARD 50/1221-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83155
ARD 1000Flanged1/2"25ARD 15/1222-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83009
ARD 1000Flanged1/2"25ARD 15/1222-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83010
ARD 1000Flanged1/2"25ARD 15/1222-P2Spherolic Cast IronBrass / PTFE2 - FPMP - PTFE (Max 40c)83011
ARD 1000Flanged3/4"25ARD 20/1222-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83040
ARD 1000Flanged3/4"25ARD 20/1222-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83041
ARD 1000Flanged3/4"25ARD 20/1222-P2Spherolic Cast IronBrass / PTFE2 - FPMP - PTFE (Max 40c)83042
ARD 1000Flanged1"25ARD 25/1222-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83067
ARD 1000Flanged1"25ARD 25/1222-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83068
ARD 1000Flanged1"25ARD 25/1222-P2Spherolic Cast IronBrass / PTFE2 - FPMP - PTFE (Max 40c)83069
ARD 1000Flanged1.5"25ARD 40/1222-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83115
ARD 1000Flanged1.5"25ARD 40/1222-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83116
ARD 1000Flanged1.5"25ARD 40/1222-P2Spherolic Cast IronBrass / PTFE2 - FPMP - PTFE (Max 40c)83117
ARD 1000Flanged2"25ARD 50/1222-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83157
ARD 1000Flanged2"25ARD 50/1222-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83158
ARD 1000Flanged2"25ARD 50/1222-P2Spherolic Cast IronBrass / PTFE2 - FPMP - PTFE (Max 40c)83159
ARD 1000 (Heavy Fuel Oil, Accuracy +-1%)Flanged1/2"25ARD 15/1223-A2Spherolic Cast IronBrass / PTFE2 - FPMA - Aluminium (Max 180c)83012
ARD 1000 (Heavy Fuel Oil, Accuracy +-1%)Flanged3/4"25ARD 20/1223-A2Spherolic Cast IronBrass / PTFE2 - FPMA - Aluminium (Max 180c)83043
ARD 1000 (Heavy Fuel Oil, Accuracy +-1%)Flanged1"25ARD 25/1223-A2Spherolic Cast IronBrass / PTFE2 - FPMA - Aluminium (Max 180c)83070
ARD 1000 (Heavy Fuel Oil, Accuracy +-1%)Flanged1.5"25ARD 40/1223-A2Spherolic Cast IronBrass / PTFE2 - FPMA - Aluminium (Max 180c)83118
ARD 1000 (Heavy Fuel Oil, Accuracy +-1%)Flanged2"25ARD 50/1223-A2Spherolic Cast IronBrass / PTFE2 - FPMA - Aluminium (Max 180c)83160
ARD 1000Flanged1"25ARD 25/1222-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83067
ARD 1000Flanged1"25ARD 25/1222-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83068
ARD 1000Flanged1"25ARD 25/1222-P2Spherolic Cast IronBrass / PTFE2 - FPMP - PTFE (Max 40c)83069
ARD 1000Flanged1"25ARD 25/1222-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83067
ARD 1000Flanged1"25ARD 25/1222-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83068
ARD 1000Flanged1"25ARD 25/1222-P2Spherolic Cast IronBrass / PTFE2 - FPMP - PTFE (Max 40c)83069
ARD 1000Flanged1/2"16ARD 15/1111-A2Spherolic Cast IronBrass / PPS2 - FPMA - Aluminium (Max 130c)83000
ARD 1000Flanged1/2"16ARD 15/1111-G2Spherolic Cast IronBrass / PPS2 - FPMG - Graphite (Max 130c)83002
ARD 1000Flanged1/2"16ARD 15/1111-P2Spherolic Cast IronBrass / PPS2 - FPMP - PTFE (Max 40c)83004
ARD 1000Flanged1/2"40ARD 15/2224-A2Spherolic Cast IronStainless Steel / PPS2 - FPMA - Aluminium (Max 130c)83013
ARD 1000Flanged1/2"40ARD 15/2224-G2Spherolic Cast IronStainless Steel / PPS2 - FPMG - Graphite (Max 130c)83014
ARD 1000Flanged1/2"40ARD 15/2224-S2Spherolic Cast IronStainless Steel / PPS2 - FPMS - Stainless Steel (Max 130c)83015
ARD 1000Flanged1/2"40ARD 15/2224-P2Spherolic Cast IronStainless Steel / PPS2 - FPMP - PTFE (Max 40c)83017
ARD 1000Flanged3/4"40ARD 20/2224-A2Spherolic Cast IronStainless Steel / PPS2 - FPMA - Aluminium (Max 130c)83218
ARD 1000Flanged3/4"40ARD 20/2224-G2Spherolic Cast IronStainless Steel / PPS2 - FPMG - Graphite (Max 130c)83219
ARD 1000Flanged3/4"40ARD 20/2224-S2Spherolic Cast IronStainless Steel / PPS2 - FPMS - Stainless Steel (Max 130c)83220
ARD 1000Flanged3/4"40ARD 20/2224-P2Spherolic Cast IronStainless Steel / PPS2 - FPMP - PTFE (Max 40c)83221
ARD 1000Flanged1"40ARD 25/2224-A2Spherolic Cast IronStainless Steel / PPS2 - FPMA - Aluminium (Max 130c)83071
ARD 1000Flanged1"40ARD 25/2224-G2Spherolic Cast IronStainless Steel / PPS2 - FPMG - Graphite (Max 130c)83072
ARD 1000Flanged1"40ARD 25/2224-S2Spherolic Cast IronStainless Steel / PPS2 - FPMS - Stainless Steel (Max 130c)83073
ARD 1000Flanged1"40ARD 25/2224-P2Spherolic Cast IronStainless Steel / PPS2 - FPMP - PTFE (Max 40c)83075
ARD 1000Flanged1.5"40ARD 40/2224-A2Spherolic Cast IronStainless Steel / PPS2 - FPMA - Aluminium (Max 130c)83119
ARD 1000Flanged1.5"40ARD 40/2224-G2Spherolic Cast IronStainless Steel / PPS2 - FPMG - Graphite (Max 130c)83120
ARD 1000Flanged1.5"40ARD 40/2224-S2Spherolic Cast IronStainless Steel / PPS2 - FPMS - Stainless Steel (Max 130c)83121
ARD 1000Flanged1.5"40ARD 40/2224-P2Spherolic Cast IronStainless Steel / PPS2 - FPMP - PTFE (Max 40c)83123
ARD 1000Flanged2"40ARD 50/2224-A2Spherolic Cast IronStainless Steel / PPS2 - FPMA - Aluminium (Max 130c)83161
ARD 1000Flanged2"40ARD 50/2224-G2Spherolic Cast IronStainless Steel / PPS2 - FPMG - Graphite (Max 130c)83162
ARD 1000Flanged2"40ARD 50/2224-P2Spherolic Cast IronStainless Steel / PPS2 - FPMP - PTFE (Max 40c)83165
ARD 2000Flanged1/2"40ARD 15/2225-A2Spherolic Cast IronStainless Steel / PTFE2 - FPMA - Aluminium (Max 180c)83018
ARD 2000Flanged1/2"40ARD 15/2225-G2Spherolic Cast IronStainless Steel / PTFE2 - FPMG - Graphite (Max 180c)83019
ARD 2000Flanged1/2"40ARD 15/2225-S2Spherolic Cast IronStainless Steel / PTFE2 - FPMS - Stainless Steel (Max 180c)83020
ARD 2000Flanged1/2"40ARD 15/2225-P2Spherolic Cast IronStainless Steel / PTFE2 - FPMP - PTFE (Max 40c)83021
ARD 2000Flanged3/4"40ARD 20/2225-A2Spherolic Cast IronStainless Steel / PTFE2 - FPMA - Aluminium (Max 180c)83044
ARD 2000Flanged3/4"40ARD 20/2225-G2Spherolic Cast IronStainless Steel / PTFE2 - FPMG - Graphite (Max 180c)83045
ARD 2000Flanged3/4"40ARD 20/2225-S2Spherolic Cast IronStainless Steel / PTFE2 - FPMS - Stainless Steel (Max 180c)83046
ARD 2000Flanged3/4"40ARD 20/2225-P2Spherolic Cast IronStainless Steel / PTFE2 - FPMP - PTFE (Max 40c)83047
ARD 2000Flanged1"40ARD 25/2225-A2Spherolic Cast IronStainless Steel / PTFE2 - FPMA - Aluminium (Max 180c)83076
ARD 2000Flanged1"40ARD 25/2225-G2Spherolic Cast IronStainless Steel / PTFE2 - FPMG - Graphite (Max 180c)83077
ARD 2000Flanged1"40ARD 25/2225-S2Spherolic Cast IronStainless Steel / PTFE2 - FPMS - Stainless Steel (Max 180c)83078
ARD 2000Flanged1"40ARD 25/2225-P2Spherolic Cast IronStainless Steel / PTFE2 - FPMP - PTFE (Max 40c)83079
ARD 2000Flanged1.5"40ARD 40/2225-A2Spherolic Cast IronStainless Steel / PTFE2 - FPMA - Aluminium (Max 180c)83124
ARD 2000Flanged1.5"40ARD 40/2225-G2Spherolic Cast IronStainless Steel / PTFE2 - FPMG - Graphite (Max 180c)83125
ARD 2000Flanged1.5"40ARD 40/2225-S2Spherolic Cast IronStainless Steel / PTFE2 - FPMS - Stainless Steel (Max 180c)83126
ARD 2000Flanged1.5"40ARD 40/2225-P2Spherolic Cast IronStainless Steel / PTFE2 - FPMP - PTFE (Max 40c)83127
ARD 2000Flanged2"40ARD 50/2225-A2Spherolic Cast IronStainless Steel / PTFE2 - FPMA - Aluminium (Max 180c)83166
ARD 2000Flanged2"40ARD 50/2225-G2Spherolic Cast IronStainless Steel / PTFE2 - FPMG - Graphite (Max 180c)83167
ARD 2000Flanged2"40ARD 50/2225-P2Spherolic Cast IronStainless Steel / PTFE2 - FPMP - PTFE (Max 40c)83169
ARD 2000Flanged1/2"40ARD 15/2225-G6Spherolic Cast IronStainless Steel / PTFE6 - PTFEG - Graphite (Max 180c)83022
ARD 2000Flanged1/2"40ARD 15/2225-S6Spherolic Cast IronStainless Steel / PTFE6 - PTFES - Stainless Steel (Max 180c)83023
ARD 2000Flanged1/2"40ARD 15/2225-P6Spherolic Cast IronStainless Steel / PTFE6 - PTFEP - PTFE (Max 40c)83024
ARD 2000Flanged3/4"40ARD 20/2225-G6Spherolic Cast IronStainless Steel / PTFE6 - PTFEG - Graphite (Max 180c)83048
ARD 2000Flanged3/4"40ARD 20/2225-S6Spherolic Cast IronStainless Steel / PTFE6 - PTFES - Stainless Steel (Max 180c)83049
ARD 2000Flanged3/4"40ARD 20/2225-P6Spherolic Cast IronStainless Steel / PTFE6 - PTFEP - PTFE (Max 40c)83050
ARD 2000Flanged1"40ARD 25/2225-G6Spherolic Cast IronStainless Steel / PTFE6 - PTFEG - Graphite (Max 180c)83080
ARD 2000Flanged1"40ARD 25/2225-S6Spherolic Cast IronStainless Steel / PTFE6 - PTFES - Stainless Steel (Max 180c)83081
ARD 2000Flanged1"40ARD 25/2225-P6Spherolic Cast IronStainless Steel / PTFE6 - PTFEP - PTFE (Max 40c)83082
ARD 2000Flanged1.5"40ARD 40/2225-G6Spherolic Cast IronStainless Steel / PTFE6 - PTFEG - Graphite (Max 180c)83128
ARD 2000Flanged1.5"40ARD 40/2225-S6Spherolic Cast IronStainless Steel / PTFE6 - PTFES - Stainless Steel (Max 180c)83129
ARD 2000Flanged1.5"40ARD 40/2225-P6Spherolic Cast IronStainless Steel / PTFE6 - PTFEP - PTFE (Max 40c)83130
ARD 2000Flanged2"40ARD 50/2225-G6Spherolic Cast IronStainless Steel / PTFE6 - PTFEG - Graphite (Max 180c)83170
ARD 2000Flanged2"40ARD 50/2225-P6Spherolic Cast IronStainless Steel / PTFE6 - PTFEP - PTFE (Max 40c)83172
ARD 3000Flanged1/2"25ARD 15/3315-G2Stainless SteelStainless Steel / PTFE2 - FPMG - Graphite (Max 180c)83026
ARD 3000Flanged1/2"25ARD 15/3315-S2Stainless SteelStainless Steel / PTFE2 - FPMS - Stainless Steel (Max 180c)83027
ARD 3000Flanged1/2"25ARD 15/3315-P2Stainless SteelStainless Steel / PTFE2 - FPMP - PTFE (Max 40c)83028
ARD 3000Flanged3/4"25ARD 20/3315-G2Stainless SteelStainless Steel / PTFE2 - FPMG - Graphite (Max 180c)83052
ARD 3000Flanged3/4"25ARD 20/3315-S2Stainless SteelStainless Steel / PTFE2 - FPMS - Stainless Steel (Max 180c)83053
ARD 3000Flanged3/4"25ARD 20/3315-P2Stainless SteelStainless Steel / PTFE2 - FPMP - PTFE (Max 40c)83054
ARD 3000Flanged1"25ARD 25/3315-G2Stainless SteelStainless Steel / PTFE2 - FPMG - Graphite (Max 180c)83096
ARD 3000Flanged1"25ARD 25/3315-S2Stainless SteelStainless Steel / PTFE2 - FPMS - Stainless Steel (Max 180c)83097
ARD 3000Flanged1"25ARD 25/3315-P2Stainless SteelStainless Steel / PTFE2 - FPMP - PTFE (Max 40c)83098
ARD 3000Flanged1.5"25ARD 40/3315-G2Stainless SteelStainless Steel / PTFE2 - FPMG - Graphite (Max 180c)83144
ARD 3000Flanged1.5"25ARD 40/3315-S2Stainless SteelStainless Steel / PTFE2 - FPMS - Stainless Steel (Max 180c)83145
ARD 3000Flanged1.5"25ARD 40/3315-P2Stainless SteelStainless Steel / PTFE2 - FPMP - PTFE (Max 40c)83146
ARD 3000Flanged2"25ARD 50/3315-G2Stainless SteelStainless Steel / PTFE2 - FPMG - Graphite (Max 180c)83173
ARD 3000Flanged2"25ARD 50/3315-P2Stainless SteelStainless Steel / PTFE2 - FPMP - PTFE (Max 40c)83175
ARD 3000Flanged1/2"25ARD 15/3315-G6Stainless SteelStainless Steel / PTFE6 - PTFEG - Graphite (Max 180c)83029
ARD 3000Flanged1/2"25ARD 15/3315-S6Stainless SteelStainless Steel / PTFE6 - PTFES - Stainless Steel (Max 180c)83030
ARD 3000Flanged1/2"25ARD 15/3315-P6Stainless SteelStainless Steel / PTFE6 - PTFEP - PTFE (Max 40c)83031
ARD 3000Flanged3/4"25ARD 20/3315-G6Stainless SteelStainless Steel / PTFE6 - PTFEG - Graphite (Max 180c)83055
ARD 3000Flanged3/4"25ARD 20/3315-S6Stainless SteelStainless Steel / PTFE6 - PTFES - Stainless Steel (Max 180c)83056
ARD 3000Flanged3/4"25ARD 20/3315-P6Stainless SteelStainless Steel / PTFE6 - PTFEP - PTFE (Max 40c)83057
ARD 3000Flanged1"25ARD 25/3315-G6Stainless SteelStainless Steel / PTFE6 - PTFEG - Graphite (Max 180c)83099
ARD 3000Flanged1"25ARD 25/3315-S6Stainless SteelStainless Steel / PTFE6 - PTFES - Stainless Steel (Max 180c)83100
ARD 3000Flanged1"25ARD 25/3315-P6Stainless SteelStainless Steel / PTFE6 - PTFEP - PTFE (Max 40c)83101
ARD 3000Flanged1.5"25ARD 40/3315-G6Stainless SteelStainless Steel / PTFE6 - PTFEG - Graphite (Max 180c)83147
ARD 3000Flanged1.5"25ARD 40/3315-S6Stainless SteelStainless Steel / PTFE6 - PTFES - Stainless Steel (Max 180c)83148
ARD 3000Flanged1.5"25ARD 40/3315-P6Stainless SteelStainless Steel / PTFE6 - PTFEP - PTFE (Max 40c)83149
ARD 3000Flanged2"25ARD 50/3315-G6Stainless SteelStainless Steel / PTFE6 - PTFEG - Graphite (Max 180c)83176
ARD 3000Flanged2"25ARD 50/3315-P6Stainless SteelStainless Steel / PTFE6 - PTFEP - PTFE (Max 40c)83178
ARD 4000Flanged1"10ARD 25/4467-P5PTFEPTFE / Tantal5 - FFKMP - PTFE (Max 50c)83105
ARD 4000Flanged1.5"10ARD 40/4467-P5PTFEPTFE / Tantal5 - FFKMP - PTFE (Max 50c)83153
VZTH 8Threaded3/8"25VZTH 8 GBrassBrassFPMGraphite92537
VZTH 8Threaded3/8"25VZTH 8 G-RE0-00314BrassBrassFPMGraphite89727
Aqua Metro Model Numbers - MODULES
DescriptionMax TemperatureModelDN 15DN 20DN 25DN 40DN 50
Roller Register180cRW/RD8350083526835528357883604
Roller Register with Reed Pulser RV 0.1 L180cRV0.1/RD8350183695---
Roller Register with With Reed Pulser RV 1 L180cRV1/RD83502835278355383579-
Roller Register with With Reed Pulser RV 10 L180cRV10/RD-83528835548358083605
Roller Register with With Inductive Pulser Switch (NAMUR) IN 0.01 L130cIN0.01/RW/RD8350983535---
Roller Register with With Inductive Pulser Switch (NAMUR) IN 0.1 L130cIN0.1/RW/RD83512835388356183587-
Roller Register with With Inductive Pulser Switch (NAMUR) IN 1 L130cIN1/RW/RD--835648359083613
Roller Register with With Inductive Pulser Switch (NAMUR) IN 0.01 L (High Temp)180cIN0.01H/RW/RD8351383539---
Roller Register with With Inductive Pulser Switch (NAMUR) IN 0.1 L (High Temp)180cIN0.1H/RW/RD83516835428356583591-
Roller Register with With Inductive Pulser Switch (NAMUR) IN 1 L (High Temp)180cIN1H/RW/RD--835688359483617
Roller Register with With Inductive Pulser Switch (NAMUR) INA (High Temp)90cINA/RW/RD8351783543835698359583621
Inductive Pulser Switch (NAMUR) INA90cINA/RD8352083546835728359883624
Roller Register with With Inductive Pulser Switch (NAMUR) INAH (High Temp)180cINAH/RW/RD8352183547835738359983625
Inductive Pulser Switch (NAMUR) INAH180cINAH/RD8352483550835768360283628
Intermediate Drive for AS or ASP Batching Control GTAS/RD8368583686836878368883689
Pulse Values
Pulser TypeModelDN 15 l/pulseDN 20 l/pulseDN 25 l/pulseDN 40 l/pulseDN 50 l/pulse
Reed Pulser RV 0.1 / 1 / 10 LRV0.111110
Reed Pulser RV 1 / 10 / 100 LRV1101010100
Inductive Pulser Switch (NAMUR) IN 0.1 L / 1 L / 10 LIN0.010.010.10.11
Inductive Pulser Switch (NAMUR) IN 0.1 L / 1 L / 10 LIN0.10.11110
Inductive Pulser Switch (NAMUR) INAINA0.00060.001850.0050.0170.06
Pulse Frequencies
Pulser TypeModel DN 15 HzDN 20 HzDN 25 HzDN 40 HzDN 50 Hz
Inductive Pulser Switch (NAMUR) ININQMax11.11141.6678.33325.0008.333
Inductive Pulser Switch (NAMUR) ININQMin0.2780.8330.2080.6250.208
Inductive Pulser Switch (NAMUR) INAINAQmax185.185225.225166.667147.059138.889
Inductive Pulser Switch (NAMUR) INAINAQmin4.6304.5054.1763.6763.472

Download Aqua Metro DOMINO Chemical Flow Meters - Brochure PDFDownload Aqua Metro DOMINO Chemical Flow Meters - Brochure PDF

Download Aqua Metro DOMINO Chemical Flow Meters - Part Number Chart PDFDownload Aqua Metro DOMINO Chemical Flow Meters - Part Number Chart PDF

Product Options

£895.00

Email us for availability

Product CodeAQURHA5V57
ConditionNew

This field is required.
Top
This item has been added to your cart...