UK Freight only 8.75
Capillary Thermometer / Temperature Gauge, Polyamide Case, for Panel Mounting 0-120c
  • Click to enlarge

Capillary Thermometer, With Polyamide Case, For Panel Mounting, 0-120c

A low cost Capillary Thermometer with Lightweight Acrylic Case

These thermometers do not require any power, so are ideal for mounting in locations where power is not available, is not reliable, or is scarce. The Capillary is supplied permanently fitted to the gauge, and is run to an area where the temperature needs to be monitored, the Dial can then be mounted remotely into a panel

The phial can be taped, tied, or glued to any surface, there is also a "Phial Pocket" available which can be screwed into a vessel so that the phial measures the temperature of the liquid around the Phial Pocket

Specification
Range0 to 120 Celcius
CasePolyamide (Black)
WindowShatterproof Acrylic
Dial LegendWhite Numerals on Black Painted Aluminium
MovementPhosphor Bronze Spiral, operated by liquid expansion
Capillary Length1000 mm
Capillary & Phial MaterialSheathed Copper
Phial Diameter6.5 mm
Dial Diameter37 mm

Also available FOR 0-120°c GAUGES ONLY (Shown Below) is a Brass, or Stainless Steel 304/316 Thermowell / Pocket. These can be useful if the bulb on the thermometer needs to enter pipework - the pocket is 50mm or 100mm long beyond the 1/2"BSP male thread, and these can be fitted through the branch in a 3/4" tee piece, these can be selected in the options below

Product Options

£15.00


Product CodeCAPC260
ConditionNew

This field is required.
Top
This item has been added to your cart...