Delta Cast Iron Gear Oil Pumps, Max 120c, Shaft Driven

A general purpose cast iron gear pump with viton seals. With its viton seals and shaft coupling it is suitable for pumping oils at up to 120 Celcius.

Performance
Voltage / Frequency	Shaft Driven, Performance Subject to Motor Utilized.
kW	Shaft Driven, Performance Subject to Motor Utilized.
Amps	Shaft Driven, Performance Subject to Motor Utilized.
RPM	Shaft Driven, Performance Subject to Motor Utilized.
Duty Cycle	Continuous
Cable Length	Not Present
Bypass Valve Y/N	Y, On all models EXCEPT 50 LPM
Max Flow	Various, Max 110 lpm
Discharge Pressure	Adjustable using Bypass Valve 6-7 Bar
Max Suction Lift (Dry)	0.5m
Max Suction Lift (Wet)	3.0m
Inlet Fitting	Various
Outlet Fitting	Various
Max Particle Tolerance	100 Micron
Max Liquid Temp	+120° Celcius
Min Liquid Temp	TBC
Max Room Temp	N/A
Min Room Temp	N/A
Thermal Protection Y/N	Y
Max Liquid Viscosity	75 cSt
Ingress Protection	Unknown

Options Available
Model	Motor RPM	Max. lpm	Max. Head (m)
Delta 20	2800	20	Shaft Driven, Performance Subject to Motor Utilized.
Delta 30	2800	30	Shaft Driven, Performance Subject to Motor Utilized.
Delta 50	2800	50	Shaft Driven, Performance Subject to Motor Utilized.
Delta 75	2800	75	Shaft Driven, Performance Subject to Motor Utilized.
Delta 100	2800	110	Shaft Driven, Performance Subject to Motor Utilized.