UK Freight only 8.75
Goldstream AC Industrial Gear Pumps for Fuel & Motor Oils 565 lpm, Cast Iron, Max 200 Celcius
  • Click to enlarge

Goldstream AC Industrial Gear Pumps for Fuel & Motor Oils 565 lpm, Cast Iron, Max 200 Celcius

Robust, and reliable Baseplate-Mounted Industrial Gear Pumps.

This Industrial Gear Pump has been designed to be chemically compatible with fluids such as Vegetable Oil, Animal Fats, Motor Oil, Waste Motor Oil, Lubricating Oils, and other medium to high viscosity oils and other non corrosive viscous substances, this does not include oils containing any water, or emulsified water. NOTE: if this pump is used to drain oil from the bottom of a vessel, and that oil contains settled water, the pump will rust solid during rest, if there is any possibiity of the oil tank containing water, then always run the pump through with dry oil after use.

  • Internal gears have bearings at both ends to ensure trouble free usage at high speed and under pressure
  • Due to the motor being long-coupled to the pump head, this enables the pump to operate at up to 200 Celcius
  • Shaft is exposed for efficient cooling, so precautions need to be taken as if it were any other piece of rotating machinery, to avoid material or persons being drawn in

IMPORTANT - Gear pumps cannot pump solid matter such as metal fragments, these will jam the gears and stop the pump, which can damage the motor or blow fuses. If you intend to use the pump for any oil with SOLID particle contamination, then you will need to install an inline filter to protect the pump, or be prepared to dismantle and unblock the pump as required. The pump can handle soft particles and will rapidly grind up soft particle matter such as food debris, fats, greases, etc. If you are likely to be pumping oil with solid particle contamination then we recommend using one of our Flexible Impeller Pumps which can handle very large solids without risking damage to the pumps impeller or motor, though flexible impeller pumps are not good for hot liquids, or pumping in high pressure or vacuum environments, in this scenario this gear pump is better.

Wetted Components
VersionCast Iron
Motor FaceCast Iron
Impellor CaseCast Iron
Impeller Case SealPaper Gasket
Motor Shaft SealViton
VanesNot Present
Vane SpringsNot Present
Rotor / Gear / ImpellorSteel
Shaft Key / NutSteel
Motor ShaftHardened Steel
Bypass Valve PistonSteel
Bypass Valve SealViton
Bypass Valve SpringStainless Steel
Performance
Voltage / FrequencyVarious, Contact us for options.
KwTBC
AmpsTBC
RPMTBC
Duty CycleContinuous at full flow
Cable Length0.75m
Bypass Valve Y/NY, Max. Setting 3.3 Bar.
Max Flow (Open Discharge)565 LPM @ 1800 RPM nom.
Discharge PressureLimited to Max. 3.3 Bar by relief valve.
Max Suction Lift (Dry)4.5 m
Max Suction Lift (Wet)4.5 m
Inlet FittingTBC
Outlet FittingTBC
Max Particle Tolerance200 Micron
Max Liquid Temp200°
Min Liquid Temp 
Max Room Temp40°
Min Room Temp 
Thermal Protection Y/NY
Max Liquid ViscosityUp to Cold Motor Oil, or similar
Ingress ProtectionIP44
Dimensions
LengthTBC cm
WidthTBC cm
HeightTBC cm
WeightTBC kg
Base PlateTBC cm

Shown Below: Internal Gear Mechanism (One bearing removed to expose gear for photograph)

Download Goldstream Gear Pump - Specifications PDFDownload Goldstream Gear Pump - Specifications PDF

Below, U.S.A. Wiring Colours. NOTE - BLACK is LIVE:

£2,155.00

Email us for availability

Product CodeGS150_Bundle
ConditionNew

This field is required.
Top
This item has been added to your cart...