UK Freight only 8.75
MMX Gear Pumps, Max 350 LPM @ 10 Bar @ 150 Celcius!
  • Click to enlarge

MMX Gear Pumps

A top quality, high performance gear pump with Viton seals, suitable for pumping clean oils. due to the materials of construction, these pumps are capable of pumping oils up to 150°c continuously

Available with a varety of CE approved, continuous duty motors, and all pumps feature on-board pressure relief valves, so if you were to select a motor of greater power than is reqired, the downstream pressure can be reduced to a satisfactory level

Wetted Components
Pump Body Cast Iron
Impellor Case Cast Iron
Impellor Case Seal Aluminium
Motor Shaft Seal Viton
Vanes Not Present
Vane Springs Not Present
Rotor / Gear / Impellor EN8 Steel
Shaft Key / Nut EN8 Steel
Motor Shaft EN8 Steel
Bypass Valve Piston Bronze
Bypass Valve Seal Viton
Bypass Valve Spring Stainless Steel
Performance
Voltage / Frequency 240v50Hz, others available upon request
kW Various
Amps Various
RPM 1450 - Can be reduced with speed controller to reduce LPM (Not available through us)
Duty Cycle Continuous
Cable Length Not Present
Bypass Valve Y/N Y
Max Flow Various, Max 350 lpm
Discharge Pressure Various, Max 10 Bar
Max Suction Lift (Dry) 0.5m
Max Suction Lift (Wet) 3.0m
Inlet Fitting Various - Threaded BSP
Outlet Fitting Various - Threaded BSP
Max Particle Tolerance 100 Micron
Max Liquid Temp +150° Celcius
Min Liquid Temp -10° Celcius
Max Room Temp +40° Celcius
Min Room Temp TBC
Thermal Protection Y/N Y
Max Liquid Viscosity 75 cSt
Ingress Protection Unknown
Options Available & Output Pressure Chart
Model Port Sizes (I/O) LPM (Max) (Bar)                         Weight (Without Motor)
MMX-1A 15x15 (1/2"BSP) 10 2 6 10                     2.5
MMX-2A 15x15 (1/2"BSP) 20   2 5 8 10                 3.0
MMX-3A 20x20 (3/4"BSP) 35     2 6 8 10               4.0
MMX-4A 25x25 (1"BSP) 50     2 4 6 8 10             7.0
MMX-5A 31x31 75         2 5 7 10           3.5
MMX-6A 40x40 (1.5"BSP) 120           2 3 6 10         9.0
MMX-7A 50x50 (2"BSP) 225               2 6 9 10     17.5
MMX-8A 65x65 (2.5") 350                 2 4 6 9 10 26.0
MOTOR HP     1/4 1/3 1/2 3/4 1 1.5 2 3 5 7.5 10 12.5 15  
MOTOR KW     0.18 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3.7 5.5 7.5 9.3 11  

SPECIAL ORDER ITEM - This item will need to be imported specially from the factory in India, Transport charges to the UK wil be in addition to the prices shown below.

Product Options

£172.92

This product is currently out of stock

Customers who bought this also bought…

Product Code MMXUUGD120
Condition New

This field is required.
Top
This item has been added to your cart...