Pedrollo F-I Standardised EN 733 Stainless Steel Inox Centrifugal Pump
Pedrollo F-I INOX Pumps are recommended for pumping aggressive liquids which chemically compatible with the materials from which the pump is made.
Used for : water supply, washing facilities, pressurization, fire prevention systems, irrigation, industry, water circulation in air conditioning systems, agriculture.
The pump should be installed in a covered area, protected from the weather.
2 Year Manufacturers Warranty
Wetted Components| Pump Body | Stainless Steel 316 |
| Impellor Case | Stainless Steel 316 |
| Impellor Case Seal | Viton |
| Motor Shaft Seal | Viton |
| Vanes | Not Present |
| Vane Springs | Not Present |
| Rotor / Gear / Impellor | Stainless Steel 316 |
| Shaft Key / Nut | Stainless Steel 316 |
| Motor Shaft | Stainless Steel 316 |
| Bypass Valve Piston | Not Present |
| Bypass Valve Spring | Not Present |
Performance| Voltage / Frequency | 50 Hz |
| kW | 4 - 7.5 |
| Amps | |
| RPM | 2900 |
| Duty Cycle | Continuous |
| Cable Length | None |
| Bypass Valve Y/N | N |
| Max Flow | 2200 lpm |
| Discharge Pressure | 3.8 Bar |
| Max Suction Lift (Dry) | None |
| Max Suction Lift (Wet) | 7 m |
| Inlet Fitting | 65mm or 80mm, Consult PDF Below |
| Outlet Fitting | 50mm or 65mm, Consult PDF Below |
| Max Particle Tolerance | |
| Max Liquid Temp | +90c |
| Min Liquid Temp | -10c |
| Max Room Temp | |
| Min Room Temp | |
| Thermal Protection Y/N | Y |
| Ingress Protection | IP44 |
Options Available| Model | kW | H(meters) | l/min |
| F50 160C-I | 4 | 16 - 27 | 1000 - 300 |
| F50 160B-I | 5.5 | 21-32 | 1100 - 300 |
| F50 160A-I | 7.5 | 27 - 37 | 1100 - 300 |
| F65 125C-I | 4 | 11 - 16 | 1800 - 600 |
| F65 125B-I | 5.5 | 13 - 18 | 2000 - 600 |
| F65 125A-I | 7.5 | 18 - 23 | 2200 - 600 |
For 110v 50Hz motors please email us for availability and price.
Download Pedrollo Catalogue 50Hz PDF
Download Pedrollo Catalogue 60Hz PDF
