Pedrollo Top Vortex GM, Submersible Pump for Dirty Water
The TOP-VORTEX/GM pump is suitable for use with dirty water and comes complete with a vertical float switch meaning that the pump can be used in particularly small spaces. As a result of the design solutions that have been adopted, such as the complete cooling of the motor and the shaft with double seal, these pumps are easy to use and reliable. They are suitable for use in applications such as clearing dirty water, emptying tanks, discharging domestic waste water, and for emptying small collection traps containing suspended solids up to a maximum of Ø 20 mm.
2 Year Manufacturers Warranty
Wetted Components| Pump Body | Technopolymer |
| Impellor Case | Technopolymer |
| Impellor Case Seal | NBR |
| Motor Shaft Seal | NBR |
| Vanes | Not Present |
| Vane Springs | Not Present |
| Rotor / Gear / Impellor | Technopolymer |
| Shaft Key / Nut | Stainless Steel 304 |
| Motor Shaft | Stainless Steel 304 |
| Bypass Valve Piston | Not Present |
| Bypass Valve Spring | Not Present |
Performance| Voltage / Frequency | 50Hz |
| kW | 0.25 - 0.55 |
| Amps | Various, Consult PDF Below |
| RPM | 2900 |
| Duty Cycle | Continuous |
| Cable Length | TBC |
| Bypass Valve Y/N | N |
| Max Flow | 180 l/min |
| Discharge Pressure | 0.65 Bar |
| Max Suction Lift (Dry) | Submersed |
| Max Suction Lift (Wet) | 14 mm above ground level |
| Inlet Fitting | NA |
| Outlet Fitting | |
| Max Particle Tolerance | 20mm |
| Max Liquid Temp | +40C |
| Min Liquid Temp | |
| Max Room Temp | |
| Min Room Temp | |
| Thermal Protection Y/N | Y |
| Ingress Protection | IPX8 |
Options Available| Pedrollo Part Number | Model | Cable Length | kW | Hp | Head (m) | l/min |
| 48TOPV12A1SJR | TOP 2 Vortex GM | 5 m | 0.37 | 0.50 | 7 - 1.5 | 0 - 180 |
| 48TOPV13A1SJR | TOP 3 Vortex GM | 5 m | 0.37 | 0.50 | 7 - 1.5 | 0 - 180 |
Download Pedrollo Top Vortex GM - 50Hz PDF
Download Pedrollo Top Vortex GM - 60Hz PDF
