Pedrollo Top Vortex, Submersible Pump for Dirty Water
The Top Vortex pump is suitable for use with dirty water that is not chemically aggressive towards the materials from which the pump is made.
As a result of the design solutions that have been adopted, such as the complete cooling of the motor and the shaft with double seal, these pumps are easy to use and reliable. They are suitable for use in applications such as clearing dirty water, emptying tanks, discharging domestic waste water, and for emptying collection traps containing suspended solids up to a maximum of 20 mm.
2 Year Manufacturers Warranty
Wetted Components| Pump Body | Technopolymer |
| Impellor Case | Technopolymer |
| Impellor Case Seal | NBR |
| Motor Shaft Seal | NBR |
| Vanes | Not Present |
| Vane Springs | Not Present |
| Rotor / Gear / Impellor | Technopolymer |
| Shaft Key / Nut | Stainless Steel 304 |
| Motor Shaft | Stainless Steel 304 |
| Bypass Valve Piston | Not Present |
| Bypass Valve Spring | Not Present |
Performance| Voltage / Frequency | 50Hz |
| kW | 0.37 |
| Amps | Various, Consult PDF Below |
| RPM | 2900 |
| Duty Cycle | Continuous |
| Cable Length | TBC |
| Bypass Valve Y/N | N |
| Max Flow | 180 lpm |
| Discharge Pressure | 0.7 Bar |
| Max Suction Lift (Dry) | None |
| Max Suction Lift (Wet) | 25mm |
| Inlet Fitting | NA |
| Outlet Fitting | 1.25" |
| Max Particle Tolerance | 20mm |
| Max Liquid Temp | +40C (+90 for 3 mins max intermittent service) |
| Min Liquid Temp | |
| Max Room Temp | |
| Min Room Temp | |
| Thermal Protection Y/N | Y |
| Ingress Protection | IPX8 |
Options Available| Pedrollo Part Number | Model | Cable Length | kW | Hp | Head (m) | l/min |
| 48TOPV12A1 | TOP 2 Vortex | 5 m | 0.37 | 0.50 | 1.5 - 7 | 20 - 180 |
| 48TOPV13A1 | TOP 3 Vortex | 5 m | 0.37 | 0.50 | 1.5 - 7 | 20 - 180 |
Download Pedrollo Top Vortex - 50Hz PDF
Download Pedrollo Top Vortex - 60Hz PDF
