Piusi K33 ATEX Nutating Disc Flow Meters, ATEX Approved
The K33 ATEX approved meter measures the exact quantity of the dispensed diesel, petrol or kerosene in private applications. This meter is reliable, inexpensive, and easy to install and calibrate if necessary. Thanks to their reduced flow resistance, the meters can perform well under gravity flow conditions, as well as pumping installations that are within flammable environments. These flow meters can be installed on either rigid or flexible pipe lines, or directly into a pump or tank.
The meters are listed with seperate part numbers for different flow directions, however, if you wish to change the orientation to either of the other 3 possibilities, then this is simply done by removing the black cover, unscrewing and rotating the counter assembly and then replacing the black cover.
This meter displays 1 Resettable Total, and 1 Non-Resettable Cumulative Total
Wetted ComponentsHousing | Aluminium |
Nutating Disc | Acetyl (Delrin) |
Shaft | 316 Stainless Steel |
Face Seal | Viton |
Calibration Screw | Brass |
Features & PerformanceModel Number | K33 ATEX |
Suitable For | Diesel, Biodiesel |
Display | Mechanical, 3 Digit (2.1) |
Power Source | None Required |
Minimum Flow Rate | 20 lpm |
Maximum Flow Rate | 120 lpm |
Accuracy | ±1% (User Calibration) |
Factory Calibration | Yes |
User Calibration | Yes |
Inlet / Outlet Fittings | 1" BSP Female |
Maximum Operating Pressure | 10 bar / 145 PSI |
Burst Pressure | 30 Bar |
OptionsPart Number | Flow Direction |
F00570000 | Right to Left |
F00570010 | Bottom to Top |
F00570020 | Top to Bottom |
F00570030 | Left to Right |
Download Piusi K33 ATEX - Catalogue Page PDF