Piusi ST200 DC, High Flow Portable Fuel Transfer Pumps
The Piusi ST 200 DC dispenses diesel fuel at a rate of up to 200 lpm, utilising 2x Piusi Bypass3000 Pumps
The low weight of the unit and the possibility of fitting wheels make it easy to handle and suitable for operating on worksites on vehicles with large storage tanks
This is a pump only. You will require suction & delivery hoses, a foot valve, and a dispensing nozzle, please email us if you cant find these in our store.
Wetted ComponentsPump Body | Cast Iron (Painted) |
Impellor Case | Cast Iron (Painted) |
Impellor Case Seal | Viton |
Motor Shaft Seal | Viton |
Vanes | Acetyl |
Vane Springs | Steel |
Rotor / Gear / Impellor | Sintered Steel |
Shaft Key / Nut | 304 Stainless Steel |
Motor Shaft | 304 Stainless Steel |
Bypass Valve Piston | Acetyl |
Bypass Valve Seal | Not Present |
Bypass Valve Spring | Stainless Steel |
PerformancePart Number | F00318000 |
Voltage / Frequency | 24vDC |
kW | 1.2 |
Amps | 50 |
RPM | |
Duty Cycle | 30 Min on 30 Min Off |
Cable Length | 6 m with Battery Clamps |
Bypass Valve Y/N | Y |
Max Flow | 200 lpm @ 1m head |
Discharge Pressure | 2.0 Bar / 29 PSI |
Max Suction Lift (Dry) | 2m |
Max Suction Lift (Wet) | 3m |
Inlet Fitting | 1.5" BSP |
Outlet Fitting | 1.5" BSP |
Max Particle Tolerance | 100 Micron |
Max Liquid Temp | 40 Celcius |
Min Liquid Temp | |
Max Room Temp | 40 Celcius |
Min Room Temp | |
Thermal Protection Y/N | Y |
Max Liquid Viscosity | Diesel |
Ingress Protection | IP44 |
AccessoriesPart Number | Description |
R16860000 | Handy Kit (Handle & Wheels) |
Download Piusi ST200 DC Datasheet PDF