Plastic High Flow Chemical Hand Pump
The Plastic High Flow Chemical Hand Pump is rotary hand pump for quick, manual dispensing that comes with a rubber hose. This pump is suitable for use with corrosive chemicals, alcohols, acids, alkalis, oils, solvents, lubricants and also for use as a hand fuel pump.
Features of the Plastic High Flow Chemical Hand Pump:
- Manual oil, diesel and chemical hand pump
- Rotary type
- Plastic - PPS / Ryton construction
- Wetted parts: PPS, 304SS, Teflon & NBR
- Max flow rate: 1 Litre per revolution
- Max viscosity: 90cSt
- 1" curved spout
- C/W 1.3m rubber hose
- 2" bung adaptor
- 1000mm suction pipe
- Suitable for drums up to 205 litres
Please note: Whilst suitable for chemicals, please check individual material compatability for the chemical in question.
Performance| Voltage | NA |
| Max Suction Length | 1060mm |
| Max Flow | 1l / Rev |
| Outlet Pressure | NA |
| Max Viscosity | Diesel |
| Internal Bypass | No |
| Adjustable Bypass | No |
| Power Kw | NA |
| RPM | NA |
| Max Liquid Temp | |
| Max Room Temp | |
| Ingress Protection | |
| Ports | |
| Weight | |
Wetted Components| Pump Body | PPS / Ryton |
| Impellor Case | PPS / Ryton |
| Impellor Case Seal | NBR |
| Motor Shaft Seal | NBR |
| Vanes | Teflon |
| Vane Springs | Stainless Steel |
| Rotor / Gear / Impellor | |
| Shaft Key / Nut | Stainless Steel |
| Shaft | Stainless Steel |
|
Customers who bought this also bought…
