Protego E/KS Vent Cap, End-of-Line, ATEX
PLEASE EMAIL US FOR PRICES
- Vent cap provides protection against environmental impact (harsh weather conditions, bird nests, etc.)
- Cost effective device
- Almost maintenance free
- Certified flow performance curves
Function and Description
The E/KS vent cap allows vessels which are not pressurize to vent. The vent cap is made out of plastic and is the best solution in applications with aggressive media. This E/KS vent cap prevents rain and dirt from entering the vent line. The device is not flame transmission proof. It is often used in combination with detonation flame arresters, when those are used in vent lines, installed at a position which creates a long run up distance from the end of the vent line to prevent endurance burning. The E/KS vent cap will then be installed at the end of that vent line to prevent particles or rain from entering the line.
The vent caps main components are a housing (1), a weather hood (2) and spacers (3).
Dimensions| DN | 50 / 2" | 80 / 3" | 100 / 4" | 150 / 6" | 200 / 8" |
| a | 135 / 5.31 | 140 / 5.51 | 145 / 5.71 | 195 / 7.68 | 200 / 7.87 |
| b | 170 / 6.69 | 230 / 9.06 | 300 / 11.81 | 375 / 14.76 | 450 / 17.2 |
*Dimensions in mm / inches.
Material Selection| Design | A | B | C |
|
| Housing | PE | PP | PVDF |
| Weather hood | PE | PP | PVDF |
Special materials upon request.
Flange Connection Type| EN 1092-1; Form B1 |
| ASME B16.5 CL 150 R.F |
Design Types and Specifications| Vent cap, basic design | E/KS |
Special designs available on request.
