UK Freight only 8.75
ZVA Slimline GBZ, Automatic Chemical Nozzle (60 lpm), ATEX Approved
  • Click to enlarge

ZVA Slimline GBZ, Automatic Chemical Nozzle (60 lpm), ATEX Approved

Zinc-Free Bronze Body, Stainless Spout, FEP (PTFE) Seals.

Popular for use with alcoholic spirit as it is available with a curved spout with depth stop for the filling of barrels, such as Brandy, Whisky, Cognac etc.

Suitable only for wet hose delivery, not for gravity flow.

  • Patented venturi type automatic shut-off with safety cut-out attitude valve.
  • Built-in check valve
  • 3-speed lever latch with removeable latch pin EB 280

Suitable For;

  • Aliphatic Hydrocarbons: Petrol/Gasoline, Diesel, Jet Fuels, Diesel, Fuel Oils, Kerosene
  • Aromatic Hydrocarbons: Benzene, Toluene, Xylol
  • Chlorinated Hydrocarbons: Trichloroethylene, Perchloroethylene, Carbon Tetrachloride
  • Methylene Chloride
  • Cohols, Commercial: Ethyl, Butyl, Isopropyl, Methyl Alcohol, Methanol, M100, Ethanol
  • Liquid Foodstuffs: Spirits, Drinking Water
  • Ester, Acetates, Ether: Acetic Ester, Ethyl Acetate, Butyl Acetate, Ethyl Ether, Dimethyl Ether, Amines
  • Ketones, Aldehydes: Acetone, Anone, Methyl Ethyl Ketone, Acet/Benz/Formaldehyde
  • Glycols, Glycerine, Glysantin, Defrosting Fluids, Anti-Freezing Fluids containing Water
  • Water, Anorganic Salt Solutions, Weak Alkalis, Weak Acids

Nozzles supplied will be ZVA 'Slimline 2', the replacement for the original ZVA Slimline, the only difference between the two models being the hand grip pattern. Actual picture shown above is of the ZVA Slimline 2

An automatic shut-off nozzle can only be used on pumped dispensing systems, they will not work on gravity-fed dispensing systems

Approved for use in ATEX areas - SIRA Certificate Number 03ATEX9487U, Category - Ex II 1 G

There are various options available for ZVA Slimline Nozzles, these include a choice of Guard, and Spout patterns. Most of the time a Standard Guard (Guard No 4) and Spout (Spout Length 185 mm) are used, however for existing installations where the dispensing pump system has been designed to accept a specific (or older) style of Guard or Spout, then the correct style can be selected to ensure compatibility with the Nozzle Holster

PLEASE NOTE THAT DUE TO NOZZLES BEING MADE TO ORDER, THERE IS A 30.00 GBP CHARGE FOR NOZZLES ORDERED INCORRECTLY THAT NEED TO BE RE-WORKED

Specification
InletVarious, Consult Chart
Spout Diameter24.5 mm
Trigger CatchYes, 3 Position
Swivel IncludedYes
Min Flow rate0 lpm
Max Flow rate60 lpm
Min Back Pressure7 PSI / 0.5 Bar
Max Back Pressure50 PSI / 3.5 Bar
Weight1.8 Kg
Wetted Components
BodyZinc-Free Bronze
SealsFEP (PTFE) Coated Viton
SpringStainless Steel
Main StemStainless Steel
Valve SeatAcetyl Resin (Delrin)
DiaphragmPTFE
SwivelStainless Steel
LeverRilsan Coated Steel
Guard StyleSpout StyleInlet TypeHose ConnectionSpout LengthSpout MaterialBoot ColourPart Number
EG281.1ER242.1 VASwivel1"BSP Male185 mmStainless SteelBlackZVA 1.0 GBZ
EG281.1ER242.1 VASwivel1"BSP Female185 mmStainless SteelBlackZVA 1.1 GBZ
EG281.1ER242 CSwivel1"BSP MaleC-Spout, Length TBCStainless SteelBlackZVA 1.0 GBZ-C
EG281.1ER242 CSwivel1"BSP FemaleC-Spout, Length TBCStainless SteelBlackZVA 1.1 GBZ-C

Other guard styles available upon request:

Splash GuardsMaterialPart Number
Splash Guard - GREEN (Petrol Only)PVCZVA SGG
Splash Guard - BLACK (Diesel Only)PVCZVA SGB
Splash Guard - RED (Diesel Only)PVCZVA SGR
Splash Guard - YELLOW (Diesel Only)PVCZVA SGY
Alternative Colour Boots for Diesel NozzlesMaterialPart Number
Boot - REDPVCZVA EK 144 R
Boot - YELLOWPVCZVA EK 144 Y
Boot - BLUEPVCZVA EK 144 BU

Download ZVA RG - Datasheet PDFDownload ZVA RG - Datasheet PDF

Product Options

£847.40


Customers who bought this also bought…

Product CodeZVAPW7IR77
ConditionNew

This field is required.
Top
This item has been added to your cart...