UK Freight only 8.75
Capillary Thermometer / Temperature Gauge, Polyamide Case For Panel Mounting
  • Click to enlarge

Capillary Thermometer, With Polyamide Case for Panel Mounting

A low cost and compact, Capillary Thermometer with Rectangular Polyamide Case

These thermometers do not require any power, so are ideal for mounting in locations where power is not available, is not reliable, or is scarce. The Capillary is supplied permanently fitted to the gauge, and is run to an area where the temperature needs to be monitored, the Display can then be mounted remotely

The phial can be taped, tied, or glued to any surface, there is also a "Phial Pocket" available which can be screwed into a vessel so that the phial measures the temperature of the liquid around the Phial Pocket

Specification
RangeTemp Option A = -40° to +40°
Temp Option B = 0° to 120°
CasePolyamide (Black)
WindowShatterproof Acrylic
Display LegendWhite Numerals on Black Painted Aluminium
MovementPhosphor Bronze Spiral, operated by liquid expansion
Capillary Length1500 mm
Capillary & Phial MaterialSheathed Copper
Phial Diameter6.5 mm
Display Diameter58 mm X 25 mm

Also available FOR 0-120°c GAUGES ONLY (Shown Below) is a Brass, or Stainless Steel 304/316 Thermowell / Pocket. These can be useful if the bulb on the thermometer needs to enter pipework - the pocket is 50mm or 100mm long beyond the 1/2"BSP male thread, and these can be fitted through the branch in a 3/4" tee piece, these can be selected in the options below

Product Options

£17.92


Product CodeCAP7260
ConditionNew

This field is required.
Top
This item has been added to your cart...