UK Freight only 8.75
Capillary Thermometer / Temperature Gauge, Stainless Steel Case, Panel Mounting Clamp
  • Click to enlarge

Capillary Thermometer, With Stainless Steel Case and Mounting Clamp

A durable, reliable, and very accurate Capillary Thermometer with 316 Stainless Steel Case, supplied complete with a Mounting Camp, for securing the face into a panel from behind (avoiding screws showing on the front)

These thermometers do not require any power, so are ideal for mounting in locations where power is not available, is not reliable, or is scarce. The Capillary is supplied permanently fitted to the gauge, and is run to an area where the temperature needs to be monitored, the Dial can then be mounted remotely on its bracket

The phial can be taped, tied, or glued to any surface, there is also a "Phial Pocket" available which can be screwed into a vessel so that the phial measures the temperature of the liquid around the Phial Pocket

Specification
Range Temp Option A = -40° to +40°
Temp Option B = 0° to 120°
Temp Option C = +50° to +350°
Case Stainless Steel
Window Shatterproof Acrylic
Dial Legend Black Numerals on White Painted Aluminium
Movement Phosphor Bronze Spiral, operated by liquid expansion
Capillary Length 1500 mm
Capillary & Phial Material Sheathed Copper
Phial Diameter 6.5 mm
Dial Diameter 60 mm, 80 mm, or 100 mm

Also available FOR 0-120°c GAUGES ONLY (Shown Below) is a Brass, or Stainless Steel 304/316 Thermowell / Pocket. These can be useful if the bulb on the thermometer needs to enter pipework - the pocket is 50mm or 100mm long beyond the 1/2"BSP male thread, and these can be fitted through the branch in a 3/4" tee piece, these can be selected in the options below

Product Options

£20.50


Product Code CAPK260
Condition New

This field is required.
Top
This item has been added to your cart...