Statically Bonded (ATEX), Hardwall Wire & Cloth Reinforced Hose, with BSPP Ends
A high quality, Steel Helix Reinforced Black NBR Alloy Hose, with swaged, chrome plated end fittings, electrically tested for conductivity.
Suitable for Diesel, Heating Oil, Kerosene, Petrol, Biodiesel and Ethanol. This hose is statically bonded, for use in an ATEX Zone
Tested to EN1360
Also available in short lengths for use as pig-tails to connect inline safety-break valves.
Although this hose is hardwall it has no internal supporting steel spiral so it is best used for applications where the hose hangs loose rather than on a hose reel.
Specification| Material | NBR Alloy, Internally Steel Braided |
| Inner Colour | Black |
| Outer Colour | Black |
| Working Pressure | <16 Bar |
| Burst Pressure | 16 Bar |
| Temperature Range | TBC |
| Antistatic | Yes |
| Ageing and Ozone Resistant | TBC |
Product Options| Product Code | Length | Internal Diameter | End Fitting Size |
| SBH10.3/4 | 10ft | 19mm | 3/4" Male BSPP with O-Ring |
| SBH12.3/4 | 12ft | 19mm | 3/4" Male BSPP with O-Ring |
| SBH15.3/4 | 15ft | 19mm | 3/4" Male BSPP with O-Ring |
| SBH20.3/4 | 20ft | 19mm | 3/4" Male BSPP with O-Ring |
| SBH25.3/4 | 25ft | 19mm | 3/4" Male BSPP with O-Ring |
| SBH1.3/4 | 275mm (PIGTAIL) | 19mm | 3/4" Male BSPP with O-Ring |
| SBH1.3/4.500 | 500mm (PIGTAIL) | 19mm | 3/4" Male BSPP with O-Ring |
| WASH2 | | | Pack of 10 replacement washers only for SBH.3/4 |
| SBH10.1 | 10ft | 25mm | 1" Male BSPP with O-Ring |
| SBH12.1 | 12ft | 25mm | 1" Male BSPP with O-Ring |
| SBH15.1 | 15ft | 25mm | 1" Male BSPP with O-Ring |
| SBH20.1 | 20ft | 25mm | 1" Male BSPP with O-Ring |
| SBH25.1 | 25ft | 25mm | 1" Male BSPP with O-Ring |
| SBH1.1 | 275mm (PIGTAIL) | 25mm | 1" Male BSPP with O-Ring |
| SBH1.1.500 | 500mm (PIGTAIL) | 25mm | 1" Male BSPP with O-Ring |
| WASH1 | | | Pack of 10 replacement washers only for SBH.1 |
