Shop by Category

Statically Bonded (ATEX), NBR/PVC, Wire & Cloth Reinforced Hose, with BSP Ends

Product Information

Statically Bonded, NBR/PVC, Wire & Cloth Reinforced Hose, with BSP Ends

A high quality, Steel Helix and Cloth Reinforced Black NBR/PVC Alloy Hose, with Aluminium Hose Tails, clamped on with Dixon Bolt Clamps, and electrically tested for conductivity. We have found the bolt clamps to be more popular with customers than crimps because in an emergency the clamps can be repositioned should a hose need to be shortened etc.

Suitable for Diesel, Heating Oil, Kerosene, and other similar heavy oils. Not for Petrol. This hose is statically bonded, for use in an ATEX Zone

  • RoHS 2011/65/EU Directive, REACH Regulation (1907/2006), TRB S 2153.
  • By grounding the copper wire the hose is electrically bonded. The electrical resistance R ≤ 102Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC).

Most popular with those who wish to use the hose on a Hose Reel, because the hose does not crush when coiled onto the reel, which means fuel can be dispensed with the hose partially coiled up.

This hose is produced from an alloy of different plastics which gives it greater flexibility than pure PVC or Nitrile hose, a Non-Marking exterior which is particularly popular with boat owners.

As standard, the prices shown are for Equal Parallel Male ends (Equal meaning on 1"ID Hose, the tails are 1"BSP, and so forth) We can fit 1" BSP Parallel Male, 1"BSP Taper Male, 3/4"BSP Parallel Male, or any 2 of these 3 options - price is the same regardless of the ends, if you require different ends please just make a note in the comments box at checkout or email us..

Available in any length, email us if the length you require is not listed

Also available in 20, 25, 32, 38, and 50mm ID, and in lengths up to the maximum hose coil size. Please enquire for details

Photograph shown is not the actual product for visual aid only

Specification
Material NBR/PVC, Steel Helix, Polyester Yarn, Copper Wire
Inner Colour Black
Outer Colour Black, Brown Stripe
Working Pressure up to 14 Bar
Burst Pressure up to 42 Bar
Temperature Range -30 to +80 Celcius
Antistatic Yes
Ageing and Ozone Resistant Yes
Performance
Internal Diameter (mm) 20 25 32 38 50
External Diameter (mm) 29 35 43 49 63
Working Pressure @20 Celcius (Bar) 14 12 11 10 8
Bursting Pressure @20 Celcius (Bar) 42 36 33 30 24
Vacuum mH2O 10 10 9 9 8
Bend Radius (mm) 60 80 100 110 150
Temperature Range (Celcius) -30 to +80 -30 to +80 -30 to +80 -30 to +80 -30 to +80
Maximum Roll Length (m) 60 60 60 30/40 30/40

Download Statically Bonded Hose PDFDownload Statically Bonded Hose PDF

Product Options:

1 Inch ID, 01.6m Length (£50.00)
1 Inch ID, 02.0m Length (£53.00)
1 Inch ID, 03.0m Length (£60.00)
1 Inch ID, 04.0m Length (£67.00)
1 Inch ID, 05.0m Length (£74.00)
1 Inch ID, 06.0m Length (£81.00)
1 Inch ID, 07.0m Length (£88.00)
1 Inch ID, 08.0m Length (£95.00)
1 Inch ID, 09.0m Length (£102.00)
1 Inch ID, 10.0m Length (£109.00)
1 Inch ID, 11.0m Length (£116.00)
1 Inch ID, 12.0m Length (£123.00)
1 Inch ID, 12.0m Length (£123.00)
1 Inch ID, 13.0m Length (£130.00)
1 Inch ID, 14.0m Length (£137.00)
1 Inch ID, 15.0m Length (£144.00)
1 Inch ID, 16.0m Length (£151.00)
1 Inch ID, 17.0m Length (£158.00)
1 Inch ID, 18.0m Length (£165.00)
1 Inch ID, 19.0m Length (£172.00)
1 Inch ID, 20.0m Length (£179.00)
1 Inch ID, 30.0m Length (£249.00)

Product Code: MER0P36K52

Quantity:

Customers who bought this also bought…

Mobile Site