UK Freight only 8.75
Technoton DFM Differential-Flow Digital LCD Meter for Engine Fuel Consumption
  • Click to enlarge

Technoton DFM Differential-Flow Digital LCD Meter for Engine Fuel Consumption

Excellent quality, Engine Fuel Consumption DIFFERENTIAL Meters, for monitoring engine fuel usage by measuring the ingoing fuel, and deducting the fuel being returned to the tank from the injector pump, particularly useful on diesel vehicles where return fuel lines are common

Suitable for all fuel oils, providing the fuel is clean, can be used with;

  • Diesel
  • Petrol
  • Kerosene
  • Heating Oil
  • Other Petroleum Deriviates
  • Biodiesel
  • Vegetable Oil
  • Fuel Blends
  • Fuel Substitutes

OPTIONAL FITTING KIT: An adaptor kit is available which has fittings to enable connection to 3/8"BSP Male, 3/8"BSP Female, 10mm Tube Compression, and 3/8" (9.53mm) Hose Barb (All in the one kit)

3 Models available to suit various engine fuel consumption rates. Referring to your vehicle manual should give some indication as to the likely flow range required

Meters Available
  Flow Range Minimal Differential Consumption Connection Thread Accuracy Within Flow Range
DFM 100 CD 10 - 100 LPH 5 LPH M14x1.5 ±1-3% (Depends on ratio of forward to reverse flow)
DFM 250 CD 50 - 250 LPH 10 LPH M14x1.5 ±1-3% (Depends on ratio of forward to reverse flow)
DFM 500 CD 100 - 500 LPH 20 LPH M16x1.5 ±1-3% (Depends on ratio of forward to reverse flow)
Meter Specification
Operating Temperatures -40 to +80 °c
Voltage 10-50 vDC
IP Rating IP 54
Electrical Connection 15cm lead with plug on DFM meter + 7.5m lead wth plug on one end and bare wires at other to connect to DC supply
Output Signal None
Min / Max Kinematic Viscosity 1.5-6.0 mm2/Sec / Centistokes
Nominal / Max Pressure 2 to 25 Bar
Max Particle Tolerance 80 Micron
Fitting Size Consult Chart Below
Output Type Consult Chart Below

Shown Below, Installation Diagram, Meter Fitted Before Pump (Less Accurate)

Shown Below, Installation Diagram, Meter After Pump (More Accurate)

Shown Below, Optional Fitting Kit. Each DFM Fitting kit contains 4 of EACH item shown below:

Download Technoton DFM Operation Manual (All Models) PDFDownload Technoton DFM Operation Manual (All Models) PDF

Product Options

£374.80


Product Code TECEZMNI8
Condition New

This field is required.
Top
This item has been added to your cart...