UK Freight only 8.75
Watts Televar TLM, Hydrostatic Contents Gauges
  • Click to enlarge

Watts Televar TLM, Hydrostatic Contents Gauges

The Televar TLM gauge is extremely popular for commercial and domestic sites where reliability and accuracy is essential

  • Featuring a hand-pump mechanism the gauges do not require any power, and are therefore ideally suited to hazardous environments
  • Constructed from High-Impact Plastic but without Ingress-Protection, these gauges should always be fitted inside a weather-proof housing
  • With versions available for vertical, or horizontal tanks, each displays the tanks contents as a percentage of the total capacity, and is suitable for tanks from 0.9 m up to 3.0 m in height
  • Supplied with 50m of black Polyethylene Connection Tube, and a GRP weighted Nylon Balance Chamber with 3m of NBR suspension tube
  • Suitable only for tanks that are permanently atmospherically vented
  • For all low-viscosity Fuel and Oil products which are compatible with GRP, NBR and Nylon. Bespoke Balance Chambers for agressive liquids can also be produced to your requirements.

Manufacturer Part Number: TLM3R:01.104-04.130-05.150

Min Tank Depth0.9 metres
Max Tank Depth3.0 Metres
ScalePercentage of capacity
Size160 mm x 170 mm
Tank Fitting Adaptor1" BSP Male Threaded
Max TemperatureUnknown
Max Viscosity (Redwood No.1 @ 16 Celcius)Unknown
Tube Length Supplied50 Metres

Product Options


Product CodeATK_Watts_Televar

This field is required.
This item has been added to your cart...